Product Description
Telescopic flange prolonged cardan shaft Coupling(SWP-A)
Product Description
SWP partition profile bearing the cross shaft universal coupling items: substitute of bearings for, SWP sort cardan design bearing break up shaft bolt, suited for hoisting and conveying machinery and other large equipment, connecting 2 various axis transmission shaft, axis angle of A~F kind not a lot more than 10 levels, the G type is not greater than 5 degrees.
Merchandise Parameters
♦Basic Parameter And Principal Dimension
Type | Tactical diameter D mm |
Nominal torque Tn kN·m |
Fatique torque Tf kN·m |
Axis angle β (°) |
Stretch duration S mm |
Measurement(mm) | Rotary inertia kg·mtwo |
Mass kg |
|||||||||||
Lmin | D1 js11 |
D2 H7 |
D3 | E | E1 | B×h | h1 | L1 | n-d | Lmin | Improve one hundred |
Lmin | Improve one hundred |
||||||
SWP160A | 160 | 16 | eight | ≤10 | fifty | 660 | 140 | 95 | 114 | fifteen | 4 | 20×12 | 6 | eighty five | 6-thirteen | .thirteen | .0059 | forty seven | 2.one |
SWP180A | 180 | 20 | ten | ≤10 | sixty | 752 | 155 | a hundred and five | 121 | 15 | 4 | 24×14 | seven | 95 | six-15 | .22 | .0072 | 60 | two.three |
SWP200A | 200 | 31.5 | 16 | ≤10 | 70 | 823 | one hundred seventy five | one hundred twenty five | 17 | 17 | 5 | 28×16 | 8 | one hundred ten | 8-15 | .37 | .0114 | eighty one | 3.4 |
SWP225A | 225 | 40 | twenty | ≤10 | 76 | 933 | 196 | 135 | 152 | 20 | 5 | 32×18 | 9 | a hundred thirty | 8-seventeen | .sixty three | .5710 | 109 | six.six |
SWP250A | 250 | sixty three | 31.five | ≤10 | eighty | 978 | 218 | a hundred and fifty | 168 | 25 | five | 40×25 | 12.5 | 135 | eight-19 | one.02 | .0407 | 147 | seven.3 |
SWP285A | 285 | 90 | 45 | ≤10 | a hundred | 1133 | 245 | one hundred seventy | 194 | 27 | 7 | 40×30 | fifteen | 150 | 8-21 | 2.seventeen | .0702 | 241 | 9.4 |
SWP315A | 315 | one hundred forty | 63 | ≤10 | 110 | 1250 | 280 | 185 | 219 | 32 | seven | 40×30 | 15 | a hundred and seventy | ten-23 | three.86 | .1144 | 322 | 12. |
SWP350A | 350 | one hundred eighty | 90 | ≤10 | 120 | 1380 | 310 | 210 | 245 | 35 | 8 | 50×32 | 16 | 185 | 10-23 | 6.sixty six | .1663 | 428 | thirteen.six |
SWP390A | 390 | 250 | 112 | ≤10 | one hundred twenty | 1495 | 345 | 235 | 273 | forty | 8 | 70×36 | 18 | 205 | ten-twenty five | 11.fifty three | .2695 | 566 | eighteen. |
SWP435A | 435 | 355 | one hundred sixty | ≤10 | a hundred and fifty | 1710 | 385 | 255 | 299 | 42 | 10 | 80×40 | 20 | 235 | 16-28 | 21.eighty one | .3645 | 932 | twenty. |
SWP480A | 480 | 450 | 224 | ≤10 | one hundred seventy | 1910 | 425 | 275 | 351 | 47 | 12 | 90×45 | 22.5 | 265 | 16-31 | 38.04 | .7571 | 1294 | 28. |
SWP550A | 550 | 710 | 315 | ≤10 | one hundred ninety | 2135 | 492 | 320 | 402 | fifty | 12 | 100×45 | 22.five | 290 | sixteen-31 | 61.28 | one.1842 | 1744 | 35.7 |
SWP600A | 600 | 1000 | 500 | ≤10 | 210 | 3580 | 544 | 380 | 450 | fifty five | 15 | 90×55 | 27.5 | 360 | 22-34 | ninety eight.sixty three | one.7159 | 2330 | 40.5 |
SWP640A | 640 | 1250 | 630 | ≤10 | 230 | 2685 | 575 | 385 | 480 | sixty | fifteen | 100×60 | thirty | 385 | 18-38 | 167.67 | two.3080 | 3153 | 48.three |
·Observe:L is the duration of installation,such as the value of S/Z shrinkage.
Detailed Photos
Packaging & Shipping
Company Profile
HangZhou CZPT Equipment Production Co., Ltd. is a large-tech business specializing in the design and style and manufacture of various kinds of coupling. There are 86 workers in our organization, including 2 senior engineers and no fewer than twenty mechanical layout and manufacture, warmth treatment, welding and other pros.
Innovative and affordable method, full detection indicates. We organization actively introduce international advanced technological innovation and equipment, on the foundation of the problem, we make complete use of the benefit and do much more analysis and innovation. Rigid to higher high quality and run strictly in accordance with the ISO9000 high quality certification program normal method.
Our business materials diverse kinds of merchandise. Large quality and realistic value. We stick to the theory of “high quality first, services first, continuous enhancement and innovation to satisfy the clients” for the management and “zero defect, zero problems” as the high quality aim.
Following Income Service
1.Style Solutions
Our layout crew has expertise in cardan shaft relating to item layout and development. If you have any demands for your new merchandise or desire to make even more enhancements, we are right here to provide our help.
two.Solution Companies
raw materials → Slicing → Forging →Rough machining →Shot blasting →Heat therapy →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping
three.Samples Treatment
We could build the sample in accordance to your need and amend the sample constantly to meet up with your require.
4.Research & Growth
We usually study the new demands of the market and build the new design when there is new autos in the market place.
5.Quality Control
Every step must be specific examination by Specialist Personnel according to the common of ISO9001 and TS16949.
FAQ
Q 1: Are you trading business or producer?
A: We are a specialist manufacturer specializing in manufacturing
a variety of sequence of couplings.
Q 2:Can you do OEM?
Sure, we can. We can do OEM & ODM for all the customers with personalized artworks of PDF or AI format.
Q 3:How long is your shipping time?
Typically it is twenty-thirty times if the merchandise are not in stock. It is according to quantity.
Q 4: Do you provide samples ? Is it free of charge or additional ?
Indeed, we could offer the sample but not for totally free.Actually we have a extremely excellent cost principle, when you make the bulk order then price of sample will be deducted.
Q 5: How extended is your guarantee?
A: Our Guarantee is 12 thirty day period under regular circumstance.
Q 6: What is the MOQ?
A:Typically our MOQ is 1pcs.
Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection ahead of packing.
Q 8: Can I have a pay a visit to to your manufacturing unit ahead of the purchase?
A: Positive,welcome to visit our factory.
Q 9: What is actually your payment?
A:1) T/T.
♦Get in touch with Us
Net: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China
Standard Or Nonstandard: | Standard |
---|---|
Shaft Hole: | as Your Requirement |
Torque: | as Your Requirement |
Bore Diameter: | as Your Requirement |
Speed: | as Your Requirement |
Structure: | Flexible |
Customization: |
Available
| Customized Request |
---|
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by CX 2023-04-10