Product Description
Agricultural PTO Shaft Yoke Tractor Clutch Spline Joint Cardan Couplings Cross Drive Universal Propeller Metal u power take off shaft
Application of Agricultural PTO Shaft
An agricultural PTO shaft is a shaft that is used to transmit power from a tractor’s power take-off (PTO) to an implement. The PTO shaft is typically made of steel or aluminum and is fitted with a universal joint at each end. The universal joint allows the shaft to transmit power even when the tractor and implement are not perfectly aligned.
Agricultural PTO shafts are used to power a wide variety of implements, including:
- Hay balers: Hay balers are used to compress hay into bales that can be stored or transported.
- Tractors: Tractors are used to pull trailers, plow fields, and perform other tasks.
- Brush hogs: Brush hogs are used to clear land of brush and weeds.
- Grain augers: Grain augers are used to move grain from 1 place to another.
- Irrigation systems: Irrigation systems are used to water crops.
- Crop-cutting/gathering units: Crop-cutting/gathering units are used to harvest crops.
- Combines: Combines are used to harvest grain crops.
- Planters: Planters are used to plant seeds in the ground.
Agricultural PTO shafts are an essential part of many agricultural operations. They allow farmers to use their tractors to power a wide variety of implements, which helps them to be more productive.
Here are some of the advantages of using agricultural PTO shafts:
- Efficiency: Agricultural PTO shafts are a very efficient way to transmit power from a tractor to an implement.
- Versatility: Agricultural PTO shafts can be used to power a wide variety of implements.
- Durability: Agricultural PTO shafts are made from strong materials and are designed to last for many years.
Here are some of the disadvantages of using agricultural PTO shafts:
- Cost: Agricultural PTO shafts can be expensive.
- Maintenance: Agricultural PTO shafts require regular maintenance to ensure that they operate properly.
- Safety: Agricultural PTO shafts can be dangerous if they are not used properly.
Overall, agricultural PTO shafts are a valuable tool for farmers. They allow farmers to use their tractors to power a wide variety of implements, which helps them to be more productive.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
How do PTO drive shafts handle variations in length and connection methods?
PTO (Power Take-Off) drive shafts are designed to handle variations in length and connection methods, allowing them to be adaptable to different equipment setups and applications. These variations are accommodated through the following features and mechanisms:
1. Telescoping Design:
Many PTO drive shafts are designed with a telescoping mechanism, which enables the length of the drive shaft to be adjusted. Telescoping allows for flexibility in matching the distance between the power source (e.g., tractor PTO) and the driven equipment. By extending or retracting the telescoping sections of the drive shaft, operators can achieve the desired length and ensure proper alignment. This feature is particularly useful when connecting equipment that may have varying distances from the power source.
2. Overlapping Tubes:
PTO drive shafts often consist of multiple tubes that overlap when the drive shaft is fully collapsed. These overlapping tubes provide structural stability and allow for the length adjustment of the drive shaft. By extending or retracting the drive shaft, the overlapping tubes slide within each other, accommodating variations in length. The overlapping tube design ensures that the drive shaft maintains its integrity and alignment during operation.
3. Splined Connections:
PTO drive shafts typically feature splined connections, which provide a secure and reliable method of joining the drive shaft components. Splines are ridges or teeth machined onto the drive shaft and mating component, such as the yoke or flange. The splined connections allow for angular misalignment and axial movement while transmitting power smoothly. They can accommodate variations in length by allowing the drive shaft to extend or retract without compromising the torque transfer capabilities.
4. Locking Mechanisms:
To ensure the stability and safety of the PTO drive shaft, locking mechanisms are incorporated into the design. These mechanisms secure the telescoping sections or splined connections in place once the desired length is achieved. Common locking mechanisms include spring-loaded pins, quick-release collars, or locking rings. These mechanisms prevent unintentional movement or separation of the drive shaft components during operation, ensuring a secure connection even under dynamic loads.
5. Universal Joints:
Universal joints are integral components of PTO drive shafts that allow for angular misalignment between the driving and driven shafts. They consist of two yokes connected by a cross-shaped bearing. Universal joints accommodate variations in length and connection angles, allowing the drive shaft to transfer power smoothly and efficiently even when the equipment is not perfectly aligned. The flexibility of universal joints helps compensate for any misalignment caused by changes in length or connection methods.
6. Adapters and Couplings:
In situations where there are differences in connection methods or sizes between the power source and the driven equipment, adapters and couplings can be used. These components bridge the gap between different connection types, allowing the PTO drive shaft to be compatible with a wider range of equipment. Adapters and couplings may include flanges, spline adapters, or quick-detach couplers, depending on the specific connection requirements.
7. Customization Options:
Manufacturers of PTO drive shafts often provide customization options to accommodate specific length and connection requirements. Customers can request drive shafts of different lengths or specify the types of connections needed for their particular equipment. Customization allows for precise tailoring of the PTO drive shafts to match the equipment setup, ensuring optimal performance and compatibility.
In summary, PTO drive shafts handle variations in length and connection methods through telescoping designs, overlapping tubes, splined connections, locking mechanisms, universal joints, adapters, couplings, and customization options. These features and mechanisms provide the necessary flexibility and adjustability to accommodate different equipment setups and ensure efficient power transfer. Whether it’s adjusting the length, adapting to varying connection types, or compensating for misalignment, PTO drive shafts are designed to handle the variations encountered in different applications and industries.
Can you provide real-world examples of machinery that use PTO drive shaft technology?
PTO (Power Take-Off) drive shaft technology is widely utilized in various machinery across different industries. It enables the transfer of power from a power source, such as an engine or motor, to driven equipment or implements. Here are some real-world examples of machinery that commonly use PTO drive shaft technology:
1. Agricultural Machinery:
PTO drive shafts are extensively used in agricultural machinery. Tractors, for instance, often feature a PTO that allows power to be transferred to a range of implements, including plows, cultivators, mowers, balers, and grain augers. These implements are connected to the PTO drive shaft, which provides the necessary power for their operation. PTO drive shafts play a key role in enhancing the efficiency and versatility of agricultural equipment.
2. Forestry Equipment:
In the forestry industry, PTO drive shafts are employed in various machinery used for wood processing and harvesting. Equipment such as wood chippers, stump grinders, log splitters, and portable sawmills often utilize PTO drive shafts to transmit power from tractors or other power sources. PTO drive shafts enable efficient and reliable operation of these forestry machines, contributing to productivity and effectiveness in the field.
3. Construction Machinery:
PTO drive shafts are also found in construction machinery, particularly in equipment that requires power for auxiliary functions. Examples include concrete mixers, concrete pumps, asphalt spreaders, and hydraulic attachments like augers and rotary brooms. PTO drive shafts enable the transfer of power from the main engine or hydraulic system to these auxiliary components, allowing for efficient operation and increased functionality on construction sites.
4. Industrial Equipment:
In the industrial sector, PTO drive shafts are utilized in various types of equipment. For example, industrial mixers, centrifugal pumps, air compressors, and generators often incorporate PTO drive shafts to obtain power from a prime mover or power source. This power transfer mechanism allows these machines to operate effectively and perform their intended functions in industries such as manufacturing, processing, and energy production.
5. Landscaping and Groundskeeping Equipment:
PTO drive shafts are commonly used in landscaping and groundskeeping equipment. Implements like rotary mowers, flail mowers, leaf blowers, and spreaders often rely on PTO drive shafts to receive power from tractors or other utility vehicles. PTO drive shafts enable efficient and precise cutting, mowing, and debris removal, contributing to the maintenance of parks, golf courses, sports fields, and other outdoor spaces.
6. Material Handling Machinery:
Machinery involved in material handling operations, such as forklifts, pallet jacks, and conveyor systems, may incorporate PTO drive shaft technology. PTO drive shafts provide power for auxiliary functions, such as lifting and moving loads, operating conveyor belts, or powering attachments like clamps or forks. This allows for efficient and controlled material handling in warehouses, distribution centers, and other industrial settings.
7. Marine and Boating Equipment:
PTO drive shafts are utilized in certain marine and boating applications. In larger vessels like commercial fishing boats or workboats, PTO drive shafts can transmit power from the main engine to auxiliary equipment such as winches, pumps, or generators. This helps facilitate various operations at sea, such as fishing, lifting heavy loads, or generating electricity for onboard systems.
These examples demonstrate the diverse range of machinery that incorporates PTO drive shaft technology. From agricultural and forestry equipment to construction, industrial, landscaping, material handling, and marine machinery, PTO drive shafts provide a reliable and efficient power transmission solution. Their widespread use across industries highlights the importance of PTO drive shafts in enhancing the functionality and performance of various types of equipment.
Are there different types of PTO drive shaft configurations based on equipment type?
Yes, there are different types of PTO (Power Take-Off) drive shaft configurations based on the type of equipment they are used with. PTO drive shafts are designed to accommodate the specific requirements of different equipment types, ensuring efficient power transmission and compatibility. Here’s a detailed explanation of some common PTO drive shaft configurations based on equipment type:
1. Tractor PTO Drive Shafts:
Tractors are one of the primary vehicles that utilize PTO drive shafts. Tractor PTO drive shafts are typically configured with a splined connection on one end to attach to the tractor’s PTO output shaft, and a corresponding splined connection on the other end to connect to implements or machinery. The length of the drive shaft can often be adjusted to accommodate variations in equipment sizes and operating conditions. Tractor PTO drive shafts are commonly used in agriculture, landscaping, and other applications where tractors are the primary power source.
2. Implement PTO Drive Shafts:
Implement PTO drive shafts are designed specifically for various types of implements and machinery. These drive shafts often have a splined connection on one end to attach to the implement input shaft, while the other end may have a different type of connection depending on the implement’s design. The specific configuration of implement PTO drive shafts can vary widely based on the implement type, such as mowers, balers, tillers, seeders, sprayers, and harvesters. Implement PTO drive shafts are commonly used in agriculture, construction, and other industries where implements are powered by a primary power source.
3. Truck PTO Drive Shafts:
Trucks, especially heavy-duty trucks, often utilize PTO drive shafts for powering various auxiliary equipment and systems. Truck PTO drive shafts are typically designed to transmit power from the truck’s engine or transmission to hydraulic systems, winches, cranes, or other equipment mounted on the truck. These drive shafts may have different configurations depending on the specific truck model and the intended application. Truck PTO drive shafts can handle higher torque and power requirements compared to drive shafts used in smaller vehicles.
4. Industrial PTO Drive Shafts:
Industrial applications often require PTO drive shafts to power machinery and equipment in sectors such as mining, manufacturing, material handling, and processing. Industrial PTO drive shafts are designed to handle heavy-duty operations and can vary in configuration based on the specific machinery requirements. They may incorporate features such as reinforced construction, larger diameter shafts, and specialized coupling mechanisms to accommodate high torque, speed, and power demands.
5. Specialty PTO Drive Shafts:
In addition to the commonly used configurations mentioned above, there are also specialty PTO drive shafts designed for specific applications. These can include drive shafts for specialized machinery in sectors such as forestry, oil and gas, marine, and construction. These specialty drive shafts may have unique configurations and features tailored to the specific requirements and operating conditions of the equipment they are intended to power.
Overall, PTO drive shaft configurations can vary based on the equipment type and the specific application. The design considerations include factors such as the type of connection, length adjustment mechanisms, torque and power handling capabilities, and any specialized features required by the equipment. By employing different PTO drive shaft configurations, various equipment types can efficiently transfer power from a primary power source to implements, machinery, or auxiliary systems.
editor by CX 2024-01-10
China supplier Rotavator Pto Shaft Propeller Attachment Nylon Bearing Wide Angle Cardan Tractor Sheets Tractor Drive Manual Driven Clutch Friction Telescopic Tube Shaft
Product Description
rotavator pto shaft propeller attachment nylon bearing wide angle cardan tractor sheets tractor drive manual driven clutch friction telescopic tube shaft
Application of PTO shaft
A power take-off (PTO) shaft is a mechanical component that transfers power from a power source, such as an engine or motor, to another machine or equipment. PTO shafts are commonly used in various applications where rotational force needs to be transmitted. Here are some typical applications of PTO shafts:
1. Agricultural Machinery: PTO shafts are extensively used in agricultural equipment such as tractors, combines, balers, and mowers. They connect the power source of the tractor (usually the engine) to various implements, allowing the transfer of rotational power for tasks like operating mowers, harvesting crops, baling hay, and powering irrigation pumps.
2. Forestry Equipment: PTO shafts are employed in forestry machinery, including wood chippers, log splitters, and sawmills. They enable power transmission from the engine to these equipment, facilitating wood processing, log cutting, and other forestry operations.
3. Construction Machinery: PTO shafts find applications in construction equipment such as concrete mixers, pumps, and generators. They allow power to be transmitted from the engine or motor to these machines, enabling tasks like mixing concrete, pumping water, and generating electricity on construction sites.
4. Industrial Machinery: PTO shafts are used in various industrial applications, including conveyor systems, grain elevators, industrial mixers, and rotary equipment. They transmit power from the primary source to auxiliary machinery, facilitating material handling, mixing, and processing operations in manufacturing, mining, and food processing industries.
5. Landscaping and Groundskeeping Equipment: PTO shafts are utilized in landscaping and groundskeeping machinery such as rotary mowers, brush cutters, and tillers. They enable power transfer from the engine to these implements, allowing for efficient grass-cutting, brush clearing, and soil preparation.
6. Marine Applications: PTO shafts are employed in marine propulsion systems, connecting the engine to the propeller shaft. They transmit power from the engine to the propeller, enabling propulsion and steering of boats and ships.
7. Energy Generation: PTO shafts are used in power generation applications, particularly in small-scale renewable energy systems. They connect the engine or turbine to a generator, converting rotational power into electrical power.
These are just a few examples of the diverse applications of PTO shafts. Their versatility, reliability, and ability to transmit rotational power make them indispensable in various industries where power transfer is essential for machinery and equipment operation.
Related products
We also provide Agricultural gearboxes.
Company Profile
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Carbon Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Journal Diameter Dimensional Accuracy: | IT6-IT9 |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
|---|
How do PTO drive shafts handle variations in length and connection methods?
PTO (Power Take-Off) drive shafts are designed to handle variations in length and connection methods, allowing them to be adaptable to different equipment setups and applications. These variations are accommodated through the following features and mechanisms:
1. Telescoping Design:
Many PTO drive shafts are designed with a telescoping mechanism, which enables the length of the drive shaft to be adjusted. Telescoping allows for flexibility in matching the distance between the power source (e.g., tractor PTO) and the driven equipment. By extending or retracting the telescoping sections of the drive shaft, operators can achieve the desired length and ensure proper alignment. This feature is particularly useful when connecting equipment that may have varying distances from the power source.
2. Overlapping Tubes:
PTO drive shafts often consist of multiple tubes that overlap when the drive shaft is fully collapsed. These overlapping tubes provide structural stability and allow for the length adjustment of the drive shaft. By extending or retracting the drive shaft, the overlapping tubes slide within each other, accommodating variations in length. The overlapping tube design ensures that the drive shaft maintains its integrity and alignment during operation.
3. Splined Connections:
PTO drive shafts typically feature splined connections, which provide a secure and reliable method of joining the drive shaft components. Splines are ridges or teeth machined onto the drive shaft and mating component, such as the yoke or flange. The splined connections allow for angular misalignment and axial movement while transmitting power smoothly. They can accommodate variations in length by allowing the drive shaft to extend or retract without compromising the torque transfer capabilities.
4. Locking Mechanisms:
To ensure the stability and safety of the PTO drive shaft, locking mechanisms are incorporated into the design. These mechanisms secure the telescoping sections or splined connections in place once the desired length is achieved. Common locking mechanisms include spring-loaded pins, quick-release collars, or locking rings. These mechanisms prevent unintentional movement or separation of the drive shaft components during operation, ensuring a secure connection even under dynamic loads.
5. Universal Joints:
Universal joints are integral components of PTO drive shafts that allow for angular misalignment between the driving and driven shafts. They consist of two yokes connected by a cross-shaped bearing. Universal joints accommodate variations in length and connection angles, allowing the drive shaft to transfer power smoothly and efficiently even when the equipment is not perfectly aligned. The flexibility of universal joints helps compensate for any misalignment caused by changes in length or connection methods.
6. Adapters and Couplings:
In situations where there are differences in connection methods or sizes between the power source and the driven equipment, adapters and couplings can be used. These components bridge the gap between different connection types, allowing the PTO drive shaft to be compatible with a wider range of equipment. Adapters and couplings may include flanges, spline adapters, or quick-detach couplers, depending on the specific connection requirements.
7. Customization Options:
Manufacturers of PTO drive shafts often provide customization options to accommodate specific length and connection requirements. Customers can request drive shafts of different lengths or specify the types of connections needed for their particular equipment. Customization allows for precise tailoring of the PTO drive shafts to match the equipment setup, ensuring optimal performance and compatibility.
In summary, PTO drive shafts handle variations in length and connection methods through telescoping designs, overlapping tubes, splined connections, locking mechanisms, universal joints, adapters, couplings, and customization options. These features and mechanisms provide the necessary flexibility and adjustability to accommodate different equipment setups and ensure efficient power transfer. Whether it’s adjusting the length, adapting to varying connection types, or compensating for misalignment, PTO drive shafts are designed to handle the variations encountered in different applications and industries.
What safety precautions should be followed when working with PTO drive shafts?
Working with PTO (Power Take-Off) drive shafts requires strict adherence to safety precautions to prevent accidents and ensure the well-being of individuals operating or maintaining the equipment. Here are some important safety precautions to follow when working with PTO drive shafts:
1. Read and Understand the Manufacturer’s Instructions:
Before working with PTO drive shafts, carefully read and understand the manufacturer’s instructions, operating manuals, and safety guidelines. Familiarize yourself with the specific requirements and recommendations for the PTO drive shaft model being used. The manufacturer’s instructions provide essential information regarding installation, operation, maintenance, and safety precautions.
2. Wear Appropriate Personal Protective Equipment (PPE):
Always wear the necessary personal protective equipment (PPE) when working with PTO drive shafts. This may include safety glasses, protective gloves, steel-toed boots, and appropriate clothing. PPE helps protect against potential hazards such as flying debris, entanglement, or contact with rotating components.
3. Ensure Proper Installation and Alignment:
Follow the recommended installation procedures for the PTO drive shaft. Ensure that it is correctly aligned and securely attached to both the power source and the driven equipment. Improper installation or misalignment can lead to excessive vibration, premature wear, and potential dislodgement of the drive shaft during operation.
4. Use Safety Guards and Shields:
PTO drive shafts should be equipped with appropriate safety guards and shields. These protective devices help prevent accidental contact with rotating components and minimize the risk of entanglement. Ensure that the guards and shields are properly installed and in good working condition. Do not remove or bypass them during operation.
5. Avoid Loose Clothing, Jewelry, and Hair:
When working with PTO drive shafts, avoid wearing loose clothing, jewelry, or having long hair that can get entangled in the rotating components. Secure or remove any loose items that could pose a risk of entanglement or become caught in the drive shaft during operation.
6. Disconnect Power Before Maintenance:
Prior to performing any maintenance or inspection on the PTO drive shaft, ensure that the power source is completely shut off and the equipment is at a complete stop. Disconnect the power supply and take appropriate measures to prevent accidental startup, such as locking out and tagging out the power source.
7. Regularly Inspect and Maintain the Drive Shaft:
Regularly inspect the PTO drive shaft for signs of wear, damage, or misalignment. Check for loose or missing components, and ensure that all fasteners and connections are secure. Lubricate the drive shaft as recommended by the manufacturer. Promptly address any maintenance or repair needs to prevent further damage or potential safety hazards.
8. Be Cautious of Overload and Shock Loads:
Avoid subjecting the PTO drive shaft to excessive loads or sudden shock loads beyond its rated capacity. Overloading can lead to premature wear, component failure, and potential accidents. Ensure that the equipment being driven by the PTO drive shaft does not exceed its recommended load limits.
9. Provide Training and Awareness:
Ensure that individuals working with or around PTO drive shafts receive proper training and are aware of the associated risks and safety precautions. Training should cover installation procedures, safe operation, maintenance practices, and emergency procedures. Promote a safety-conscious culture and encourage reporting of any safety concerns or incidents.
10. Seek Professional Assistance When Needed:
If you’re unsure about any aspect of working with PTO drive shafts or encounter complex maintenance or repair needs, seek professional assistance. Consulting with qualified technicians, engineers, or the equipment manufacturer can help ensure that the work is carried out safely and effectively.
Remember, safety should always be the top priority when working with PTO drive shafts. Following these precautions helps minimize the risk of accidents, injuries, and equipment damage. It is essential to stay vigilant, exercise caution, and comply with relevant safety regulations and standards.
How do PTO drive shafts handle variations in speed, torque, and angles of rotation?
PTO (Power Take-Off) drive shafts are designed to handle variations in speed, torque, and angles of rotation, allowing for efficient power transmission between the primary power source and the implement or machinery. These variations can occur due to differences in equipment sizes, operating conditions, and the specific tasks being performed. Here’s a detailed explanation of how PTO drive shafts handle these variations:
1. Speed Variations:
PTO drive shafts are engineered to accommodate speed variations between the primary power source and the implement. They achieve this through a combination of factors:
- Splined Connections: PTO drive shafts are equipped with splined connections at both ends, allowing for a secure and precise connection to the PTO output shaft and the implement input shaft. These splines provide flexibility to adjust the length of the drive shaft and accommodate different speed requirements.
- Telescoping or Sliding Mechanism: Some PTO drive shafts feature a telescoping or sliding mechanism that allows for length adjustment. This mechanism enables the drive shaft to handle speed variations by extending or retracting to maintain proper alignment and prevent excessive tension or binding. It allows the drive shaft to operate efficiently even when the distance between the primary power source and the implement changes.
- Shear Pins or Clutch Mechanism: In situations where there is a sudden increase in speed or an overload, PTO drive shafts may incorporate shear pins or a clutch mechanism. These safety features are designed to disconnect the drive shaft from the primary power source, preventing damage to the drive shaft and associated equipment.
2. Torque Variations:
PTO drive shafts are built to handle variations in torque, which are often encountered when powering different types of implements and machinery. Here’s how they manage torque variations:
- Splined Connections: The splined connections on the drive shaft and the PTO output shaft provide a secure and robust connection that can transmit high levels of torque. The splines ensure proper alignment and torque transfer between the two shafts, allowing the drive shaft to handle varying torque demands.
- Shear Pins or Clutch Mechanism: Similar to handling speed variations, shear pins or a clutch mechanism can be incorporated into PTO drive shafts to protect them from excessive torque. In the event of an overload or sudden increase in torque, these safety features disengage the drive shaft from the primary power source, preventing damage to the drive shaft and the connected equipment.
- Reinforced Construction: PTO drive shafts are typically constructed using durable materials such as steel or composite alloys. This robust construction allows them to withstand high torque levels and handle variations without compromising their structural integrity.
3. Angles of Rotation:
PTO drive shafts are designed to accommodate variations in angles of rotation between the primary power source and the implement. Here’s how they address these variations:
- Flexible Design: PTO drive shafts are flexible in nature, allowing them to adapt to different angles of rotation. The splined connections and telescoping or sliding mechanisms mentioned earlier provide the necessary flexibility to handle angular variations without compromising power transmission.
- Universal Joints: In situations where there are significant angular variations, PTO drive shafts may incorporate universal joints. Universal joints allow for smooth power transmission even when the input and output shafts are misaligned or at different angles. They accommodate the changes in rotational direction and compensate for angular variations, ensuring efficient power transfer.
By incorporating features such as splined connections, telescoping or sliding mechanisms, shear pins or clutch mechanisms, reinforced construction, and universal joints, PTO drive shafts can handle speed variations, torque variations, and angles of rotation. These design elements enable efficient power transmission and ensure the smooth operation of implements and machinery across different tasks and operating conditions.
editor by CX 2024-01-03
China Standard Tractor Forestry Stump Grinder / Three Point Stump Grinder / Pto Powered Wood Stump Grinder pto shaft clutch
Product Description
Tractor driven PTO stump grinder with 3 Point Hitch
Description of mini excavator
The RG24 PTO powered stump grinder connects directly to your tractors 3 point hitch system and is equipped with a large 24″ (61cm) diameter CZPT steel grinding flywheel and 34 tungsten carbide cutting teeth to make the removal of tree stumps a breeze! These extremely rugged stump grinders are engineered to deliver optimal performance when paired with tractors containing 20-50HP at the PTO and will easily grind up to 6″ (15cm) below the ground to remove roots and prepare the ground for grading or grass.
Product Description
The RG24 PTO powered stump grinder connects directly to your tractors 3 point hitch system and is driven by the PTO shaft. The large 24″ (61cm) diameter 3/4″ (2cm) thick CZPT steel grinding flywheel is equipped with 34 tungsten carbide cutting teeth. Designed for tractors with PTO power ranging from 20-50HP. Removing stumps on your property is now possible with the RG24 PTO drive stump grinder. It will grind up to 6″ (15cm) below the ground to remove roots and prepare the ground for grading or grass. Equipped with a chainsaw holder for easy transportation while moving around your property. The RG24 stump grinder is also quick attach compatible making hook up to your tractor quick and easy for customers equipped with a quick attach receiver.
Tractor Requirements
The RG24 stump grinder is designed to work on tractors with a PTO shaft. The stump grinder works best on tractors featuring PTO shafts that are independent of the tractors transmission drive system. This allows the operator to control the speed of the tractor independently and separately to the PTO speed. Since the tractor pulls the grinder through the stump, the rate at which the tractor moves is important and should be independent of the PTO shaft. Operating the RG24 stump grinder at 540 RPM is required.
PTO Shaft
Included with the RG24 Stump Grinder is a slip clutch style PTO shaft.
| Model | RG24 |
| Flywheel diameter | 24″/610mm |
| Flywheel thickness | 3/4″/19mm |
| Tractor | 20-50HP |
| 3-point | Cat 1 |
| PTO input | 540rpm |
| Dimensions | 29″x37″x38″/737x940x965mm |
| PTO shaft with clutch | Included |
| Weight | 490lbs/220kg |
| Packing size | 965x762x914mm |
| 20″/40″ container | 36/72pcs |
Detail of the machine
After sale
we will provide new electrical accessiores or parts in warranty during time
.(one year warranty Period)
FAQ
Q: Are you a factory or trading company?
A: We have our own factory, using “Self-produced Self-marketing” business model,reducing the cost of intermediate links.
Q: How can I get some samples?
A: We are honored to offer you samples.
Q: How does your factory do regarding quality control?
A:Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end. Warmly welcome to visit us!
Q: If I need different measurements or weight, could you offer OEM service?
A: Sure, we can provide OEM service, also we can make new mould for your product,attaching your name brand.
| Type: | Stump Grinder |
|---|---|
| Power Source: | Tractor |
| Certification: | ISO9001, CE |
| Tractor: | 20-50HP |
| 3-Point: | 3-Point |
| Pto Input: | 540rpm |
| Samples: |
US$ 1150/piece
1 piece(Min.Order) | |
|---|
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by CX 2023-05-26
China Good quality 70HP 4 Wd Wheel Drive Farm Agricultural Diesel Compact Tractor slip clutch pto shaft
Product Description
70HP 4 WD Wheel Drive Farm Agricultural Diesel Compact Tractor
1.YTO/Weichai Engine
2.Drive Wheel:4WD(4*4)
3.Four-stroke engines with high torque reserve.
4.Adjustable front and rear tracks.
5.Full hydraulic steering.
With Cabin
With Sunshade Roof
With ROPS
Technical Parameters
| Model No. | 704 | |
| Type | 4*4 | |
| Engine | Model | 4108 |
| Rated power(kw) | 51.5 | |
| RPM | 2200 | |
| Overall dimension (L*W*H) | 4120*1955*2725 | |
| Tread(mm) | Front | 1450 |
| Rear | 1530 | |
| Wheelbase | 2270 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function |
|
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+4R | |
| Weight (kg) | 2900 | |
| Tyre | Front | 8.3-24 |
| Rear | 14.9-30 | |
| PTO(RPM) | Rear seperated, 540/760 rpm | |
| PTO Shaft Spline (mm) | 6D-38×32×6 | |
| Others | Crawl Shift, Air brake, 2way hydraulic valve, forcing lift, front ballast weight, and 3 layer rear ballast weight, Canopy. |
|
| Conveyance | CBU 3 units in a 40’HC | |
Tractor Features
1.Fuel consumption reach upto 1 liter/hour diesel.
2. Differential lock prevent rear wheels skidding when climbing, operating in paddy land and rainy weather.
3.Equip with double speed of PTO shaft 540/760 rpm. Adapted to different field type.
4.Adopt full hydraulic steering, independent fuel tank, easy operating and high mobility.
5.Adjustable front and rear tracks meet agricultural needs of different areas. Extra-large water tank and high capacity maintenance-free battery make the machine with best heat-dispersion and starting performance.
6.Can adopt to various implements,such as plough,disc plough,ratory tiller,disc harrow,etc
Company Profile
TANGLAND International Company, is a wholly-owned subsidiary of CZPT GROUP, is the professional
company for Trading & International Exchange and cooperation. We set up branches in ZheJiang , ZheJiang and HangZhou, as well as overseas assembling plant, or/and showing room and service centre, in Pakistan, UAE, and some Asian & African countries. CZPT GROUP is a comprehensive company including manufacturing, assembling, Casting & Foundry, producing Casting parts, Electric Vehicle, Tractor, Light truck, Semi-trailer, Steel ball and Nylon 6 products, Running an Industrial products’Information & Exchange Platform, the headquarter is in Ji’nan, ZheJiang , and assembling, machining & foundry and castingplants are in HangZhou, HangZhou, HangZhou and HangZhou, theInformation and Exchange platform named-TANGLANDINFORMATION & TECHNOLOGY COMPANY. CZPT INTERNATIONAL,
We are mainly dealing with the importing and exporting, for Machineries, Vehicles, Equipments, Building Materials, Steel &Iron, Casting Foundry and related parts & components, regular Chemical, Nylon 6 products, Medical supplies and consumables, etc., there are our own 2000 dealers, overseas storages, overseas companies, our turnover is US dollar 150 Million, with our professional trading team efforts, and the vision to Create the Value for all the buyers and sellers.
We export 8000 sets Agricultural machines, 5000 units various light and Medium/heavy duty trucks, Semi-trailers, 30,000 sets Diesel engine and Generator sets, 15,000 tons various Casting parts, such as Pipe and fittings, Housing, etc., Steel/Iron Balls, 10,000 tons Nylon 6 Cord fabric and Yarn in the year 2016, we gather a lot of advantages for Agricultural machines, Transporting Vehicles, Power equipments, Casting Parts and Industrial materials, and enjoy the good marketing shares in One Belt & One Road countries, accumulate the exporting, marketing and services experiences, found up the Sales+Service business mode, cooperate with dealers, agents, solve the challenges in machines exporting business, e.g., service, spare parts supplying, technical supporting, warranty, etc., and start the assembling and localization in some markets, which strengthen the acknowledge and reliability from clients and users.
TANGLND FAITH: To create the value for all the customers is the only reason for CZPT existence.
Our Main Products
Tractor
18HP-240HP, 2WD and 4WD, belt drive and shaft drive tractor;
1. Suitable for road transportation, various farmland operations: design different models according to different terrains such as paddy fields, dry land, mountains, orchards, hills, etc.
2. Can be equipped with all kinds of mechanical equipment and agricultural machinery: front loader, rear excavator, bulldozer, snowplow, etc.; plow, hoe, rotary tiller, lawn mower, etc.
Farm Implements
Disc Plough, Disc Harrow,Mover/Slasher,Farm Trailer,Potato Planter,Potato Harvester,Land Leveller, Cultivator,Rotary Tiller/Rotocultivator,Share Plough,Soil Ridger,Seeder,Sprayer, Post Hole Digger,Raker,Hay Rake,Seedbed Machine,Corn Thresher,Ditcher, Rock Picker,Swather and etc..
Packaging
Service
Pre-sales service
1,24 hours online .Your inquiry will be quick reply by email .
2,Professionally and patiently introduction,details pictures and working video to show machine .
3,Visting our factory.
Service on sales
1,Test every machine and inspect the machine seriously .
2,Send the machine picture which you order , then packing it with standard export package after you confirm the machine is ok .
3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express. We will tell you the tracking number after we post the documents.
After-sales service
1, 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.
2 Training how to install the machine, training how to use, maintain and repair the machine.
FAQ
1. What is the voltage/phase for this machine ?
220V 50Hz/single phase ,380V 50Hz/three phase .We also could produce according to customer’s requirement.
2. What is your terms of payment?
T/T 30% as deposit, and &70% before delivery. We will show you the photos of the products and packages before you pay the balance.
3. What your terms of delivery?
EXW,FOB,CFR,CIF,DAF.
4. How about your delivery time?
Generally, it will take about 13 days after receipt of deposit payment. The specific delivery time depends on the items and the quantity of your order.
5. What’s your MOQ?
1 set
6. How should I do if meet some trouble while using?
We can supply English manual book and also take a video for showing how to resolve the problems or dispatch our worker to your factory.
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor, Garden Tractor, Lawn Tractor, Compact Tractor, Diesel Engine Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
The Different Parts of a PTO Shaft
Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.
Tractor’s power take-off (PTO) shaft
A Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.
Types
PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.
Rotation direction
The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.
Safety chain
One of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.
Shield
A PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
editor by CX 2023-05-15
China OEM Agricultural Machine Farm Tractor Walking Tractor slip clutch pto shaft
Product Description
Agricultural Machine Agriculture Farm Tractor
| Model No. | TL1004 | |
| Type | 4*4 | |
| Engine | Model | QC4115TA |
| Rated power(kw) | 73.5 | |
| RPM | 2300 | |
| Overall dimension (L*W*H) | 4365*2048*3060 | |
| Tread(mm) | Front | 1610(Can be adjusted to 1950) |
| Rear | 1620(Can be adjusted to 2571) | |
| Wheelbase | 2195 | |
| Clutch Type | Single blade,dry,butterfly spring pressed, separate operation, double function | |
| Gear Box | Two shaft, Straight teeth, differential lock | |
| Gear shift | 16F+8R | |
| Weight (kg) | 3400 | |
| Tyre | Front | 8.3-24 |
| Rear | 14.9-30 | |
| PTO(RPM) | Rear seperated, 540/1000 rpm | |
| PTO Shaft Spline (mm) | 8D-38×32×6 | |
Products advantages:
1 Good quality
2 competitive price
3 technology support
4 good after-sales service
5 strong production capacity
Company introduction:
TANGLAND INTERNATIONAL,
We are mainly dealing with the importing and exporting, for Machineries, Vehicles, Equipments, Building Materials, Steel & Iron, Casting Foundry and related parts & components, regular Chemical, Nylon 6 products etc., there are our own 2000 dealers, overseas storages, overseas companies, our turnover is US dollar 150 Million, with our professional trading team efforts.Our products have exported to more than 30 countries and regions.We have got good comments from different countries customers.
Creating value for all the customers, is the priority of TANGLAND.
Workshop
Package
our service
Pre-Sales Service
1. Inquiry and consulting support.
2. Sample testing support.
3.View our Factory.
After-Sales Service
1.Training how to install the machine, training how to use,maintain and repair the machine.
2.Engineers available to service machinery overseas.
FAQ
Q1.What is your terms of payment?
A:T/T 60% as deposit,and 40% before delievry.we will show you the photos of the products and packages before you pay the balance.
Q2.What your terms of delivery?
A:EXW,FOB,CFR,CIF,DAF.
Q3.How about your delivery time?
A:Generally,it will take about 20 days after receipt of deposit payment.The specific delivery time depends on the items and the quantity of your order.
Q4.Are you interested in dealership with local company?
A:Yes,we are quite interested in this business.we’d like to cooperate with some local partner to sell more tractors in local market and supply better service.
Q5.What is your warranty policy?
A:We can supply 2 years warranty for our tractors.We will provide parts as free within warranty.We can send engineer to customer place if big quality problem.We can provide internet or calling service at any time.
Q6.Do you test all your tractors before delivery?
A:Yes,we have 100% tractor test and complete quality control system before delivery.
Q7.How do you make our business long-term and good relationship?
A:1.We keep good quality,competitive price and efficient service to ensure our customers benefit;
2.We protect the benefit of dealer or agent,in specifical period and region.
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year |
| Type: | Wheel Tractor |
| Usage: | Farm Tractor |
| Certification: | ISO, CCC, ISO/TS16949 |
| Drive Wheel: | 4WD |
| Customization: |
Available
| Customized Request |
|---|
Power Take-Off (PTO) Shafts
Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.
Power take-off (PTO) shaft
The power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.
Types
There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.
Connections
A PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.
Safety
It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.
Maintenance
One of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
editor by CX 2023-04-27
China 12-37307 Clutch Shaft for Sifang Power Tiller Gn12 pto shaft extension tractor supply
Item Description
| Item No.: | 12-37307 |
| Part Name: | Clutch Shaft |
| Item No.: | Transmission Circumstance |
| Industry Focus: | Agricultural |
| Axis Form: | Straight Shaft |
| Shaft Form: | True Axis |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Substance: | Alloy Steel |
| Pressure: | Large Pressure |
| Application: | For GN12 tractor, also replacement parts applicable to SIFANG Tractors and Tillers |
| Manufacturing unit Incorporate: |
Tiller Blade Plant : Xihu (West Lake) Dis.ng hardware industrial park, Xihu (West Lake) Dis. district, ZheJiang . Disc Blade Plant : HangZhou hi-tech development zone, HangZhou, ZheJiang . Iron Wheel Plant : Xihu (West Lake) Dis. Tongqin City, HangZhou, zHangZhoug. Bolt and Nut Plant : Xihu (West Lake) Dis. industrial zone, HangZhou, zHangZhoug. |
| If you have any enquiry about quotation or cooperation, please really feel totally free to electronic mail us, Our sales consultant will contact you inside 24 several hours. Thank you for your curiosity in our items. | |
Click Below YOU CAN
Back again To Homepage
View far more products about Electricity Tiller Areas
Why pick FarmDiscover for cooperation?
Comparing with our competitors, we have considerably a lot more advantages as follows:
1.Since 2000 we have been exporting our components and have prosperous knowledge in agriculture components export.
2. A lot more professional product sales staffs to assure the much better provider.
three. Shut to HangZhou/ZheJiang port, Reduce the transportation value and time, ensure well timed delivery.
4. Better quality to guarantee much better Credit rating.
|
US $2.14 / Piece | |
500 Pieces (Min. Order) |
###
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Appearance Shape: | Round |
###
| Customization: |
Available
|
|---|
###
| Item No.: | 12-37307 |
| Part Name: | Clutch Shaft |
| Item No.: | Transmission Case |
| Industry Focus: | Agricultural |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Material: | Alloy Steel |
| Pressure: | High Pressure |
| Application: | For GN12 tractor, also replacement parts applicable to SIFANG Tractors and Tillers |
| Factory Add: |
Tiller Blade Plant : Shuangtang hardware industrial park, Jinghai district, Tianjin. Disc Blade Plant : Yucheng hi-tech development zone, Dezhou, Shandong. Iron Wheel Plant : Wuyi Tongqin Town, Jinhua, zhejiang. Bolt and Nut Plant : Binhai industrial zone, Wenzhou, zhejiang. |
| If you have any enquiry about quotation or cooperation, please feel free to email us, Our sales representative will contact you within 24 hours. Thank you for your interest in our products. | |
|
US $2.14 / Piece | |
500 Pieces (Min. Order) |
###
| Material: | Alloy Steel |
|---|---|
| Load: | Drive Shaft |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Appearance Shape: | Round |
###
| Customization: |
Available
|
|---|
###
| Item No.: | 12-37307 |
| Part Name: | Clutch Shaft |
| Item No.: | Transmission Case |
| Industry Focus: | Agricultural |
| Axis Shape: | Straight Shaft |
| Shaft Shape: | Real Axis |
| Stiffness & Flexibility: | Stiffness / Rigid Axle |
| Material: | Alloy Steel |
| Pressure: | High Pressure |
| Application: | For GN12 tractor, also replacement parts applicable to SIFANG Tractors and Tillers |
| Factory Add: |
Tiller Blade Plant : Shuangtang hardware industrial park, Jinghai district, Tianjin. Disc Blade Plant : Yucheng hi-tech development zone, Dezhou, Shandong. Iron Wheel Plant : Wuyi Tongqin Town, Jinhua, zhejiang. Bolt and Nut Plant : Binhai industrial zone, Wenzhou, zhejiang. |
| If you have any enquiry about quotation or cooperation, please feel free to email us, Our sales representative will contact you within 24 hours. Thank you for your interest in our products. | |
What Is a PTO Shaft?
There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.
Power Take-Off
The Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.
Applications
PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.
Safety precautions
Operator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.
Design
A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.
Cost
A PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.
Buying guide
If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
editor by czh 2023-01-25
China Tractor Slasher Mower SL180, 6foot Toper Mower Slasher, Pto Shaft with Clutch with 90HP Tractor pto shaft danger
Product Description
Requirements:
Slasher
1-rear mounted grass slasher matched with 20-90HP tractor
2-doing work width 900-2200mm
three-sigle blade shaft and double blades shaft
4- with steering wheel
Tractor rear pto rotary slasher
Quick Descriptions
one)Best painting and finishing in particulars.
2)Good quality PTO shaft is normal add-ons.
three)The CZPT mower without rear wheel are offered
4)Functioning width is from 1.1m to 1.8m
5)Any thought on layout is satisfactory if the order is in quantity.
Function:
Design: 3mm prime deck plate, downfolds front and rear, steel understructure
Gearbox: 540RPM, 1: 1.93ratio.
P. T. O. Sharft Score: Series 4.
Headstock: Collapsible floating hitch.
Clutch: Adjustable friction clutch with 2x150mm clutch plates
Skids: Adjustable from 50mm-90mm cutting peak(3’6″-4’6″ model), 50-150mm cutting top for 5′ product.
| Topper Mower (Slasher) Technical specs | |||||||
| Product | SL90 | SL100 | SL110 | SL120 | SL140 | SL160 | SL180 |
| DIMENSIONS (L× W× H) | 1000× 900× 900 | 1050× 1000× 900 | 1100× 1100× 900 | 1300× 1200× 900 | 1400× 1400× 900 | 1600× 1600× 900 | 1900× 1800× 900 |
| mm | mm | mm | mm | mm | mm | mm | |
| STRUCTURE Fat | 150kg | 160kg | 165kg | 175kg | 190kg | 230kg | 260kg |
| CUTTING WIDTH | 900mm | 1000mm | 1100mm | 1200mm | 1400mm | 1600mm | 1800mm |
| CUTTING Peak | 1.5-4.5″ | one.5-4.5″ | one.5-4.5″ | one.5-4.5″ | one.5-4.5″ | 1.5-4.5″ | one.5-4.5″ |
| PTO Speed | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm |
| PTO SHAFT | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 1100mm | 6× 6× 1300mm | 6× 6× 1300mm |
| POWER Necessary | eighteen-25hp | eighteen-35hp | 18-35hp | eighteen-35hp | 25-40hp | 30-65hp | 35-65hp |
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Type: | Rotary Mowers |
|---|---|
| Cutter Type: | Rotary Lawn Mower |
| Applicable Area: | 500-1000m² |
| Feature: | Grass Box |
| Certification: | CE |
| Cutter Kind: | Straight Metal Blade |
###
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Topper Mower (Slasher) Specifications | |||||||
| MODEL | SL90 | SL100 | SL110 | SL120 | SL140 | SL160 | SL180 |
| DIMENSIONS (L× W× H) | 1000× 900× 900 | 1050× 1000× 900 | 1100× 1100× 900 | 1300× 1200× 900 | 1400× 1400× 900 | 1600× 1600× 900 | 1900× 1800× 900 |
| mm | mm | mm | mm | mm | mm | mm | |
| STRUCTURE WEIGHT | 150kg | 160kg | 165kg | 175kg | 190kg | 230kg | 260kg |
| CUTTING WIDTH | 900mm | 1000mm | 1100mm | 1200mm | 1400mm | 1600mm | 1800mm |
| CUTTING HEIGHT | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" |
| PTO SPEED | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm |
| PTO SHAFT | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 1100mm | 6× 6× 1300mm | 6× 6× 1300mm |
| POWER REQUIRED | 18-25hp | 18-35hp | 18-35hp | 18-35hp | 25-40hp | 30-65hp | 35-65hp |
| To Be Negotiated | 1 Piece (Min. Order) |
###
| Type: | Rotary Mowers |
|---|---|
| Cutter Type: | Rotary Lawn Mower |
| Applicable Area: | 500-1000m² |
| Feature: | Grass Box |
| Certification: | CE |
| Cutter Kind: | Straight Metal Blade |
###
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Topper Mower (Slasher) Specifications | |||||||
| MODEL | SL90 | SL100 | SL110 | SL120 | SL140 | SL160 | SL180 |
| DIMENSIONS (L× W× H) | 1000× 900× 900 | 1050× 1000× 900 | 1100× 1100× 900 | 1300× 1200× 900 | 1400× 1400× 900 | 1600× 1600× 900 | 1900× 1800× 900 |
| mm | mm | mm | mm | mm | mm | mm | |
| STRUCTURE WEIGHT | 150kg | 160kg | 165kg | 175kg | 190kg | 230kg | 260kg |
| CUTTING WIDTH | 900mm | 1000mm | 1100mm | 1200mm | 1400mm | 1600mm | 1800mm |
| CUTTING HEIGHT | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" | 1.5-4.5" |
| PTO SPEED | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm | 540rpm |
| PTO SHAFT | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 900mm | 6× 6× 1100mm | 6× 6× 1300mm | 6× 6× 1300mm |
| POWER REQUIRED | 18-25hp | 18-35hp | 18-35hp | 18-35hp | 25-40hp | 30-65hp | 35-65hp |
Choosing the Right PTO Shaft
There are several different types of PTO shaft. These include the Transmission PTO, the Economy PTO, the Type 4″ pto shaft, and the Two-stage clutch pto shaft. It is important to choose the correct one to ensure a smooth operation. When choosing a PTO shaft, consider the characteristics and uses of each type.
Transmission PTO
If you have been experiencing trouble with your Transmission PTO shaft, you may want to take it to a mechanic to have it looked at. A PTO problem can be frustrating and costly to fix. Here are some tips for resolving PTO problems. Start by checking your transmission oil and air pressure levels. Also, check for cracked or kinked hoses and screens. If none of these steps resolve the issue, you may need to replace your PTO.
There are two types of Transmission PTO shafts, Type 1 and Type 2. The first type was designed to be used for 540 rpm applications. Later versions were designed to handle higher PTO powers, and the diameter was changed to increase its speed. Both types have different diameters, so be sure to check the spline count.
Transmission PTOs are commonly used between tractors and farm equipment. These PTOs have the feature of a universal transmission, although the input and output ends are not always on the same plane. The drive shaft is also able to vary the angle between input and output ends. This allows the drive shaft to operate within a specified left and right expansion range.
When replacing a transmission PTO, make sure you check the shaft’s speed and backlash before installing it. In addition, check the transmission gears to ensure they are in good condition. Experts from suppliers recommend inspecting and replacing any debris on the gaskets. They also recommend setting backlash units between the transmission and PTO. In general, backlash units should range from 6,000 to 12,000 units.
To maintain the efficiency of your Transmission PTO, it is necessary to maintain the proper oil level. Make sure you regularly check the PTO fluid and filter. A change of fluid and filter is recommended every 75,000 miles and 300,000 miles. Using a dial indicator can help you to check backlash and prevent damage to the PTO or mating gear.
Economy PTO
The Economy PTO shaft allows you to reduce the engine speed when driving your PTO. This mode uses different gears to adjust the PTO shaft revs. The cab-mounted control/monitoring unit 14 uses the PTO speed information to set the parameters of the PTO. In order to operate this system, you must be aware of the lever 21 position and the type of shaft fitted.
The ratio of the input shaft 7 and the output shaft 22 determines the precise value. The ratio also depends on the type of PTO shaft and the ratio of the gearbox. There are two different types of PTO shafts, and each has different toothed wheels. To choose the right one, you should know the ratio of the shaft and the gearbox.
A Domestic PTO shaft is the most common type used in North America. It comes in a wide range of diameters and splines and can be used on a variety of applications. It is durable and is resistant to pressure, impacts, and tension. It is also equipped with a shear pin and slip clutch to protect the PTO from common obstacles.
An Economy PTO shaft enables your tractor to run at lower rpms, reducing noise and vibrations. It is perfect for a variety of agricultural equipment and is controlled by your tractor’s transmission. It is available in two types: mechanical and hydraulic. A mechanical version has a clutch, while a hydraulic version has a lever to control the torque.
The Economy PTO shaft allows you to reduce fuel costs and increase productivity by up to 2%. It also reduces noise in the cab, which is a plus. Its auto-mode feature helps you operate the Economy PTO with ease. This system can also be programmed to automatically disengage the PTO when the linkage is raised.
Two-stage clutch on pto shaft
If you’re looking to get the most out of your tractor, you should check the clutch for two-stage operation. Two-stage clutches use two separate stages to disengage the PTO and gears. If the clutch does not disengage when you push the pedal, you’ll need to adjust it. Rust buildup can cause the clutch to stick and require a rebuild or replacement. Fortunately, there are many ways to check whether your clutch is slipping.
A two-stage clutch is commonly used in transmissions with live PTOs. The first stage operates the driven portion of the transmission, while the second stage controls the PTO. This arrangement allows the PTO to work independently of the transmission, which is especially useful in tractors that use mower attachments.
This two-stage clutch is usually accompanied by a gearbox. The gears in the PTO shaft are set up to rotate at a rate of 540 revolutions per minute (rpm) when the engine is running. The second clutch is designed to operate at a higher speed and can be used with different power sources.
A two-stage clutch on the PTO shaft is a good option if you’re using a tractor that doesn’t have a slip clutch. It will limit the tractor’s torque, so you’ll save money on fuel while doing work. It also helps reduce noise and vibration.
Types of independent pto shafts
Independent PTO shafts come with their own clutch, which enables them to run independently from the tractor’s transmission. There are two main types of independent PTO shafts: mechanical and hydraulic. The mechanical version has a separate on-off selector and control lever. The hydraulic version only has a single selector.
These different types of PTO shafts are only compatible with specific implements. The speed at which they transfer energy is different, too, and some are faster than others. This is why some large tractors have higher-speed PTOs than smaller tractors. A transmission PTO requires a parking break, while an independent PTO does not.
A newer type of independent PTO shaft, the Type 4, is also available. This model runs at a higher rotational speed, around 1300 rpm, which allows for a more efficient transfer of power. In addition, the Type 4 shaft is larger, with 22 splines and a diameter of 57.5 mm. It is designed to support PTO powers of up to 450 kW or 600 horsepower.
Another type is called a “sandwich” type, which is mounted between the transmission and engine. It receives its drive from the engine shaft. This type can transfer the full power of the engine to the PTO, although it needs modifications to the driveline. It also comes with its own lubrication system.
Independent PTO shafts can be manually operated or electronically controlled. The independent PTO is easy to engage and is often operated by shifting the PTO selector lever away from the ‘OFF’ position or by flipping the PTO switch to the “ON” position. Independent PTO shafts may also feature an additional manual clutch. This clutch helps regulate heavy loads and protects the PTO drive system.
editor by czh 2023-01-16
China cheap mack truck parts wholesale auto transmission systems clutch release bearing shaft 30502-aa051 vkc3613 pto shaft extension tractor supply
OE NO.: A1643300801
Size: OEM Standard
Content: Metal, CE Certification Resources
Warranty: 12 Months
Car Make: Vehicles car
Certificate: ISO 9001:2000 TS16949
Delivery time: decided by quantity
Payment Terms: TT.Western Union.Paypal.Trade Assurance
Package Materials: customercised
Brand: ysd
Good quality: one hundred% Expert Check
Packaging Information: neutral packing as customers’ specifications
Specification
| item | value |
| OE NO. | A1643300801 |
| Size | OEM Standard |
| Material | Steel |
| Warranty | 12Months |
| Place of Origin | cn |
| Car Make | TRUCKS auto |
| Product Name | transmission shaft |
| Certificate | ISO 9001:2000 TS16949 |
| Delivery time | decided by volume |
| Payment Conditions | TT.Western Union.Paypal.Trade Assurance |
| Package Material | customercised |
carbon fiber drive shaft
editor by czh
Best near me shop made in China – replacement parts – PTO shaft manufacturer & factory Japanese series 4 pto shaft with clutch Tractor Spare Parts Cardans with ce certificate top quality low price
We – EPG Group the biggest agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
agmaster 2 pto shaft Under pto shaft measurement for ford 8n the nissan murano push shaft assistance push shaft king of cv style driveshaft managerial woods mower pto shaft perception j&r driveshafts of pto shaft u joint “Serving axial scx10 travel shaft agriculture, cardan shaft cayenne scoring a achievement via high quality of items and honesty in company”, our merchandise have been trustworthy by clients and have obtained a greater share of marketplace. EPG is willing to cooperate sincerely and build typically with close friends! Function
one&comma Appropriate for Japanese Tractors&lparKubota&solYM&solIseki&rpar
two&comma All Splined&comma Basic Bore Yokes Torque Limiter
3&comma Extensive Angel Joint–80 diploma
four&comma Wealthy experience for above 11 many years
five&comma France department can supply prolonged time guarantee
six&comma High good quality and competitive price tag
7&comma Tiny orders approved
8&comma OEM is offered
1&colon Substance&colon Steel forty five&num&comma casting&comma forging or as for each customers’ demands&time period
two&colon We can supply series 10 20 30 forty 50 sixty 70 also as for every customer’s diagrams or samples&interval
3&colon Tube&colon Lemon profile tube&comma star profile tube and triangular profile tube&interval
4&colon Yokes&colon Swift launch yoke&comma tube yokes lemon&comma tube yokes triangular simple bore yokes and shear bolt &lparH&rparand clutch and Clutch – Slip – Torque Limiter
five&colon U-joint assemblies&period
6&colon Agriculture common joint
7&colon Fulfill IS9001&colon 2000 top quality program and QS9000 stHangZhourd and CE
8&colon Higher high quality and competitive price&period
29002Cardan B1400&solB1500
29003Cardan LF-YM F14
29004Cardan gros B7000
29005Cardan TX1400
29006Cardan Iseki&lparTX1510&sol1500&rpar
29007Cardan &lparTU1400&rpar
Advantages of our business—HangZhou Lefa
1&period of time Specializing in producing and marketing the farm machine a lot more than 11 a long time&interval
two&period of time “Lefa” make in China and France&period of time
three&period “CE&interval
four&interval With the stringent good quality handle and ideal services for customers&period of time
5&interval We can supply excellent and quick after-product sales support&time period
six&interval Our aim&colon Win-get&period
seven&interval We can style and make machines according to customer’s needs&period
8&time period We created dozens of Japanese tractors areas&comma we can produce the parts with device collectively&period of time
Welcome to send us your inquiry&period of time We will deliver you the detail list with photos&period of time
Welcome to pay a visit to our manufacturing unit&excl
| Japanese tractor spare parts in Stock | |
| tractor rim | gears |
| kit coupling | bearing |
| steering wheel | tractor link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14&solF15 | link hitch |
| tyre | sealing |
| gasket | light |
| air filter | tractor hub |
| filter element | brake shoes |
| air strainer element | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor light | radiator cap |
| exhaust collector | tractor regulator |
| Tractor keys | stickers |
| gasket | light |
| tractor blades | lamps |
Japanese China tukar drive shaft in Matamoros Mexico Tractor Parts Tractor Iseki Clutch for Sale with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto manufacturing facility in China with five different branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
pto shaft harbor freight It pto shaft for kubota is 2006 toyota tundra push shaft our weasler pto shaft aim series 4 vs collection six pto shaft to tractor pto shaft extensions offer diagram of pto shaft a corvette driveshaft huge pto generate shaft components assortment bush hog sq720 elements diagram of high quality goods at reasonably priced rates, give the best provider for customers pleased and lead to our continued advancement. The firm covering 88,000 square meters, has sophisticated gear and strong complex energy, such as the numerical manage machine equipment and machining centers, CAD/CAM program, industrial robot and so forth. We deveXiHu (West Lake) Dis.ed and developed numerous tractor spare parts for Japanese Tractors&period
The elements for instance&colon Tyres&comma rim Jante&comma Package coupling KB-TX 3 point linkage&period of time Exhaust pipe Steering wheel&period of time Package coupling YM F14&solF15 ect&time period
Most of the spare areas are with inventory&time period If you are interested in&comma please truly feel simple to get in touch with me&interval
Advantages of our organization—HangZhou Lefa
1&period Specializing in producing and promoting the farm machine far more than 11 several years&period of time
two&period of time “Lefa” make in China and France&period
three&time period “CE”
4&period With the stringent top quality control and ideal service for consumers&period of time
five&period We can provide excellent and speedy right after-sales support&period
6&period Our goal&colon Acquire-acquire&time period
seven&time period We can design and make machines according to customer’s wants&period of time
eight&period We deveXiHu (West Lake) Dis.ed dozens of Japanese tractors parts&comma we can produce the areas with device together&period
Welcome to send out us your inquiry&period of time We will ship you the detail listing with pictures&interval
Welcome to check out our factory&excl
| Japanese tractor spare components in Stock | |
| tractor rim | gears |
| kit coupling | bearing |
| steering wheel | tractor website link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14&solF15 | link hitch |
| tyre | sealing |
| gasket | light |
| air filter | tractor hub |
| filter element | brake shoes |
| air strainer element | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor drinking water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor light | radiator cap |
| exhaust collector | tractor regulator |
| Tractor keys | stickers |
| gasket | light |
| tractor blades | lamps |