Tag Archives: bush hog

China Best Sales Agricultural Wide Angle Cross Yoke Adapter Universal Joint Cover Rotavator Tractor Drive Bush Hog Pto Shaft

Product Description

 

Product Description

A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer. 

Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.

Product Specifications

 

In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.

 

Packaging & Shipping

 

 

 

Company Profile

HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like  Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.

FAQ

1.WHAT’S THE PAYMENT TERM?

When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.  

2.HOW TO DELIVER THE GOODS TO US?

Usually we will ship the goods to you by sea.

3.How long is your delivery time and shipment?

30-45days

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Pto Shaft
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: 45cr Steel
Power Source: Pto Dirven Shaft
Weight: 8-15kg
After-sales Service: Online Support
Samples:
US$ 20/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

pto shaft

Are there any limitations or disadvantages associated with PTO drive shaft systems?

While PTO (Power Take-Off) drive shaft systems offer numerous advantages, there are also some limitations and disadvantages associated with their use. It’s important to consider these factors when deciding whether to implement a PTO drive shaft system. The limitations and disadvantages include:

1. Safety Risks:

PTO drive shaft systems can pose safety risks if not used and maintained properly. The rotating drive shaft, exposed splines, and universal joints can present hazards to operators and bystanders if they come into contact with them while in operation. Entanglement or entrapment of clothing, hair, or body parts in the rotating components can result in severe injuries. It is crucial to follow safety guidelines, use appropriate shielding, and implement safety devices to mitigate these risks.

2. Maintenance and Lubrication:

PTO drive shaft systems require regular maintenance and lubrication to ensure optimal performance and longevity. The joints, splines, and bearings need to be inspected, cleaned, and lubricated as recommended by the manufacturer. Failure to perform routine maintenance can lead to premature wear, increased friction, and eventual component failure, resulting in unexpected downtime and costly repairs.

3. Misalignment and Vibrations:

PTO drive shaft systems can experience misalignment and vibrations, especially when the driven equipment is not perfectly aligned with the power source. Misalignment places additional stress on the drive shaft and its components, leading to increased wear and reduced efficiency. Vibrations generated during operation can also contribute to fatigue and accelerated wear of the drive shaft and connected equipment.

4. Limited Operating Angles:

PTO drive shaft systems typically have limited operating angles due to the design constraints of universal joints. Exceeding the recommended operating angles can cause binding, increased wear, and reduced power transmission efficiency. This limitation may restrict the range of movement or flexibility when connecting PTO-driven equipment, requiring careful planning and alignment during installation.

5. Noise and Vibration:

PTO drive shaft systems can generate noise and vibrations during operation. The rotating components, especially at high speeds, can create audible noise and vibrations that may be transmitted to the operator, the equipment, and the surrounding environment. Excessive noise and vibrations can negatively impact the operator’s comfort, equipment performance, and may require additional measures to mitigate their effects.

6. Limited Power Transfer Capacity:

PTO drive shaft systems have limitations in terms of power transfer capacity. The torque and power that can be transmitted through the drive shaft depend on its design, material strength, and the selected components. In applications requiring high torque or power, alternative power transmission methods such as hydraulic systems or direct mechanical drives may be more suitable and capable of handling the required loads.

7. Compatibility Challenges:

Ensuring compatibility between PTO drive shafts and different equipment can sometimes be challenging. Equipment may have unique connection requirements, such as non-standard splines or flanges, which may require custom adapters or modifications. Achieving compatibility with older or specialized equipment can require additional effort and may not always be straightforward.

8. Cost:

Implementing a PTO drive shaft system can involve significant upfront costs, including the purchase of the drive shaft, compatible equipment, and any necessary adapters or couplings. Additionally, ongoing maintenance, lubrication, and potential repairs can contribute to the overall cost of ownership. It is important to consider the cost-benefit ratio and the specific needs of the application before investing in a PTO drive shaft system.

Despite these limitations and disadvantages, PTO drive shaft systems continue to be widely used due to their versatility, ease of use, and compatibility with a wide range of equipment. By addressing safety concerns, performing regular maintenance, and considering the specific requirements of the application, many of these limitations can be mitigated, allowing for reliable and efficient operation.

pto shaft

How do PTO drive shafts enhance the performance of tractors and agricultural machinery?

PTO (Power Take-Off) drive shafts play a critical role in enhancing the performance of tractors and agricultural machinery. They provide a reliable and efficient power transmission mechanism, enabling various functions and improving overall productivity. Here’s how PTO drive shafts enhance the performance of tractors and agricultural machinery:

1. Versatility and Compatibility:

PTO drive shafts are designed to be versatile and compatible with a wide range of agricultural implements and machinery. They come in standardized sizes and configurations, allowing easy connection and disconnection of implements. This compatibility enables farmers and operators to quickly switch between different implements, such as plows, mowers, balers, and seeders, without the need for significant equipment changes or modifications. The versatility of PTO drive shafts enhances the flexibility and efficiency of agricultural machinery, allowing them to perform multiple tasks with ease.

2. Power Transfer:

One of the primary functions of PTO drive shafts is to transfer power from the tractor’s engine to various agricultural implements. They transmit rotational power at a consistent speed, enabling the implements to perform their intended tasks efficiently. This direct power transfer eliminates the need for separate engines or motors on each implement, which saves both time and resources. PTO drive shafts provide a reliable and efficient means of power transmission, ensuring optimal performance of agricultural machinery.

3. Increased Productivity:

By enabling the connection of different implements, PTO drive shafts significantly contribute to increased productivity. Tractors equipped with PTO drive shafts can quickly switch between tasks, such as plowing, planting, and harvesting, without the need for extensive downtime or equipment changes. This allows farmers to make the most efficient use of their machinery and complete tasks in a timely manner. The ability to easily connect and disconnect implements through PTO drive shafts enhances overall productivity in agricultural operations.

4. Time Efficiency:

PTO drive shafts play a crucial role in saving time during agricultural tasks. They eliminate the need for manual or animal-driven labor, allowing for faster and more efficient operations. With PTO drive shafts, agricultural machinery can perform tasks such as plowing, tilling, and mowing at a consistent and efficient pace. This time efficiency increases the overall productivity of the farm and enables operators to cover larger areas in less time.

5. Precise Power Control:

PTO drive shafts offer precise power control, allowing operators to adjust the rotational speed of the implements according to the requirements of the task. This control is particularly valuable in tasks such as mowing or spraying, where different vegetation or crop types may require specific power settings. With PTO drive shafts, operators can fine-tune the power output to achieve optimal results, ensuring efficient and effective performance of agricultural machinery.

6. Reduced Operator Fatigue:

The use of PTO drive shafts reduces the physical strain on operators. Instead of relying on manual force or animal power to operate implements, operators can harness the power transmitted through the PTO drive shaft. This reduces fatigue, allowing operators to work for longer durations without excessive exhaustion. Reduced operator fatigue contributes to increased productivity and overall performance in agricultural tasks.

7. Integration with Modern Technology:

PTO drive shafts can integrate with modern tractor technology and control systems. This integration allows for convenient and precise control of the PTO engagement and disengagement, rotational speed, and other parameters. Tractors equipped with PTO drive shafts can be integrated with GPS guidance systems, precision farming technologies, and data management systems, further enhancing performance and efficiency in agricultural operations.

8. Ease of Maintenance:

PTO drive shafts are typically designed for ease of maintenance. They often feature accessible lubrication points, inspection ports, and replaceable components, making it easier to keep them in good working condition. Regular maintenance ensures optimal performance, reduces the risk of unexpected breakdowns, and maximizes the efficiency of tractors and agricultural machinery.

In summary, PTO drive shafts enhance the performance of tractors and agricultural machinery by providing versatility, enabling power transfer, increasing productivity, saving time, offering precise power control, reducing operator fatigue, integrating with modern technology, and facilitating maintenance. With the capabilities offered by PTO drive shafts, farmers and operators can achieve efficient and effective operation of their machinery, ultimately leading to improved agricultural productivity and profitability.

pto shaft

What factors should be considered when selecting the right PTO drive shaft for an application?

When selecting the right PTO (Power Take-Off) drive shaft for an application, several important factors should be considered to ensure optimal performance, safety, and compatibility. Here’s a detailed explanation of the key factors to consider:

1. Power and Torque Requirements:

The power and torque requirements of the application are crucial considerations. It’s essential to determine the maximum power and torque output of the primary power source (e.g., engine, transmission) and match it with the drive shaft’s capacity. Selecting a drive shaft that can handle the required power and torque levels ensures efficient power transmission and prevents overloading or damage to the drive shaft and connected equipment.

2. Speed and RPM Range:

The speed and RPM (Rotations Per Minute) range of the equipment and the primary power source should be taken into account. The drive shaft’s design should be capable of accommodating the desired speed range while maintaining smooth power transmission. It is important to select a drive shaft that can handle the intended operating speeds without excessive vibration, binding, or loss of power.

3. Equipment Size and Configuration:

The size and configuration of the equipment or implement being powered by the PTO drive shaft are crucial factors. The drive shaft’s length should be adjustable or chosen appropriately to ensure proper alignment between the primary power source and the implement input shaft. Additionally, consider any space limitations or clearance requirements within the equipment that may affect the choice of drive shaft configuration.

4. PTO Shaft Connection Type:

The type of connection required between the PTO drive shaft and the primary power source and implement is a significant consideration. Common connection types include splined connections, keyway connections, and quick-detach mechanisms. It is essential to ensure compatibility between the drive shaft’s connection type and the corresponding connections on the power source and implement to achieve a secure and reliable attachment.

5. Safety Features:

Safety features are crucial when selecting a PTO drive shaft. Shear pins, clutches, or other overload protection mechanisms should be considered to prevent damage to the drive shaft and associated equipment in the event of a sudden increase in torque or speed. These safety features help protect against accidents and reduce the risk of injury to operators and bystanders.

6. Environmental Conditions:

The environmental conditions in which the drive shaft will be operating should be taken into account. Consider factors such as temperature extremes, moisture, dust, or corrosive environments. It may be necessary to select a drive shaft with appropriate sealing, coating, or material options to ensure reliable performance and durability in the given conditions.

7. Maintenance and Serviceability:

Consider the accessibility and ease of maintenance for the chosen drive shaft. Ensure that routine maintenance tasks such as lubrication, inspection, and potential repairs can be performed conveniently. Easy serviceability helps minimize downtime and ensures the longevity of the drive shaft.

8. Compliance with Standards and Regulations:

Ensure that the selected PTO drive shaft complies with relevant industry standards and safety regulations. This includes standards for power transmission components, such as ISO 500-1 for PTO drive shafts. Compliance with these standards ensures that the drive shaft meets necessary quality, safety, and performance requirements.

By considering factors such as power and torque requirements, speed range, equipment size and configuration, PTO shaft connection type, safety features, environmental conditions, maintenance and serviceability, and compliance with standards and regulations, one can select the right PTO drive shaft that best suits the specific application’s needs. Proper selection ensures efficient power transmission, safety, and long-term reliability of the equipment.

China Best Sales Agricultural Wide Angle Cross Yoke Adapter Universal Joint Cover Rotavator Tractor Drive Bush Hog Pto Shaft  China Best Sales Agricultural Wide Angle Cross Yoke Adapter Universal Joint Cover Rotavator Tractor Drive Bush Hog Pto Shaft
editor by CX 2024-03-28

China Professional Pto Shaft Fit for Bush Hog Ath 600 and Ath 720, Ath 900, Fth 480, Fth 600, Fth 720, Mth 600, Mth 720 Series Mowers

Product Description

Pto Shaft fit for Bush Hog ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers  

 Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and many more applications.

PTO is a series 4, rated for 40HP it has 1-3/8″ 6 spline push pin on both ends for easy installment. Complete with safety shield, The PTO measures 43″ from end to end and has an 58″ maximum extended length.

 

These PTO shafts fit the following Finish Mowers:

Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers;

Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Series Mowers;

Kubota: BL348A, B342A; Caroni TC480, TC590, TC710, TC910 with spline Input Shaft;

Befco most late models with splined input shafts, early models had some with smooth input shaft;

CHINAMFG all Models;

Douglas all Models;

Tecma all Models;

Sovema all Models;

Maschio all Models;

CHINAMFG all Models;

Sicma all Models;

First Choice all Models

Related products

 

Materlal and Surface Treatment

Cross shaft

Heat treatment of 20Cr2Ni4A forging

Bearing cup

20CrMOTi forging heat treatment

Flange fork

ZG35CrMo, steel casting

Spline shaft

42GrMo forging heat treatment

Spline bushing

35CrM0 forging heat treatment

Sleeve body

42CrMo forging

Surface treatment:

spraying

Flat key, positioning ring

42GrMo forging

The above are standard models and materials.
If you have special supporting requirements, you can customize production according to customer needs.
Please click here to consult us!

Application scenarios

Company Information:

 

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Type: Pto Shaft
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Flail Mower Truck
Material: All
Power Source: Electricity
Weight: OEM
After-sales Service: Installation Guide

pto shaft

What maintenance practices are essential for prolonging the lifespan of PTO shafts?

Maintaining proper care and performing regular maintenance on Power Take-Off (PTO) shafts is crucial for prolonging their lifespan and ensuring optimal performance. By following essential maintenance practices, you can prevent premature wear, identify potential issues early on, and maximize the longevity of your PTO shafts. Here are some key maintenance practices to consider:

1. Regular Inspection: Perform routine visual inspections of the PTO shaft to check for any signs of damage, wear, or misalignment. Look for cracks, dents, bent sections, or loose components. Inspect the universal joints, coupling mechanisms, protective guards, and other associated parts. Pay attention to any unusual noises, vibrations, or changes in performance, as these can indicate underlying issues that require attention.

2. Lubrication: Proper lubrication is essential for the smooth operation and longevity of PTO shafts. Follow the manufacturer’s recommendations regarding lubrication intervals and use the recommended lubricant type. Apply lubrication to the universal joints, CV joints (if applicable), and other moving parts as specified. Regularly check for adequate lubricant levels and replenish if necessary. Ensure that the lubricant used is compatible with the shaft material and does not attract dirt or debris that could cause abrasion or damage.

3. Cleaning: Keep the PTO shaft clean and free from dirt, debris, and other contaminants. Regularly remove any accumulated dirt, grease, or residue using a brush or compressed air. Be particularly diligent in cleaning the universal joints and areas where the shaft connects to other components. Cleaning prevents the buildup of abrasive particles that can accelerate wear and compromise the shaft’s performance.

4. Guard Inspection and Maintenance: Check the protective guards and shields regularly to ensure they are securely in place and free from damage. Guards play a critical role in preventing accidental contact with the rotating shaft and minimizing the risk of injury. Repair or replace any damaged or missing guards promptly. Ensure that the guards are correctly aligned and provide sufficient coverage for all moving parts of the PTO shaft.

5. Torque and Fastener Checks: Periodically inspect and check the torque of fasteners, such as bolts and nuts, that secure the PTO shaft and associated components. Over time, vibration and normal operation can loosen these fasteners, compromising the integrity of the shaft. Use the appropriate torque specifications provided by the manufacturer to ensure proper tightening. Regularly verify the tightness of fasteners and retighten as necessary.

6. Shear Bolt or Slip Clutch Maintenance: If your PTO shaft incorporates shear bolt or slip clutch mechanisms, ensure they are functioning correctly. Inspect the shear bolts for signs of wear or damage, and replace them when necessary. Check the slip clutch for proper adjustment and smooth operation. Follow the manufacturer’s recommendations regarding maintenance and adjustment of these safety mechanisms to ensure their effectiveness in protecting the driveline components.

7. Proper Storage: When the PTO shaft is not in use, store it in a clean and dry environment. Protect the shaft from exposure to moisture, extreme temperatures, and corrosive substances. If possible, store the shaft in a vertical position to prevent bending or distortion. Consider using protective covers or cases to shield the shaft from dust, dirt, and other potential sources of damage.

8. Operator Training: Provide proper training to operators on the correct operation, maintenance, and safety procedures related to the PTO shafts. Educate them about the importance of regular inspections, lubrication, and adherence to recommended maintenance practices. Encourage operators to report any abnormalities or concerns promptly to prevent further damage and ensure timely repairs or adjustments.

9. Manufacturer and Expert Guidance: Consult the manufacturer’s guidelines and recommendations regarding maintenance practices specific to your PTO shaft model. Additionally, seek advice from experts or authorized service technicians who are knowledgeable about PTO shaft maintenance. They can provide valuable insights and assistance in implementing the best maintenance practices for your specific PTO shafts.

By following these maintenance practices, you can extend the lifespan of your PTO shafts, optimize their performance, and reduce the likelihood of unexpected failures or costly repairs. Regular inspections, lubrication, cleaning, guard maintenance, torque checks, and proper storage are all essential in ensuring the longevity and reliability of your PTO shafts.

pto shaft

Can PTO shafts be customized for specific machinery and power requirements?

Yes, PTO (Power Take-Off) shafts can be customized to meet the specific machinery and power requirements of different applications. Manufacturers offer customization options to ensure that PTO shafts are precisely tailored to the power source, driven machinery, and the intended application. Here’s a detailed explanation of how PTO shafts can be customized:

1. Shaft Length: PTO shafts can be customized in terms of length to accommodate different equipment configurations. The length of the PTO shaft is critical to ensure proper alignment and connection between the power source and driven machinery. Manufacturers can provide PTO shafts with adjustable or fixed-length options, allowing for flexibility in meeting specific length requirements. Customizing the shaft length ensures that the PTO shaft fits the equipment properly, optimizing power transfer efficiency and reducing the risk of misalignment or excessive stress.

2. Spline Sizes: PTO shafts are available with different spline sizes to match the input and output shafts of various equipment. Spline size customization allows the PTO shaft to seamlessly connect to the power source and driven machinery. Manufacturers can offer different spline configurations, such as 1-3/8 inch, 1-3/4 inch, or metric sizes, to accommodate specific machinery requirements. Customizing the spline size ensures a proper fit and secure connection, enabling efficient power transfer without the need for additional adapters or modifications.

3. Yoke Designs: PTO shafts can be customized with different yoke designs to match the connection points on the power source and driven machinery. The yoke is the component that attaches to the shaft and connects to the equipment. Manufacturers can provide various yoke designs, such as round, triangular, or splined yokes, to ensure compatibility with specific machinery. Customizing the yoke design allows for a secure and reliable connection, aligning the PTO shaft with the equipment’s input/output shafts and optimizing power transmission efficiency.

4. Torque Ratings: PTO shafts can be customized to handle specific torque requirements based on the power demands of the application. Torque is the rotational force that the PTO shaft needs to transmit from the power source to the driven machinery. Manufacturers can design PTO shafts with different torque ratings by using appropriate materials, dimensions, and reinforcement techniques. Customizing the torque rating ensures that the PTO shaft can safely and reliably handle the required power levels without premature wear or failure.

5. Coupling Mechanisms: PTO shafts can be customized with different coupling mechanisms to match the connection requirements of specific equipment. Coupling mechanisms are the means by which the PTO shaft connects and disconnects from the power source and driven machinery. Manufacturers can provide various coupling options, such as quick-release couplings, shear pin couplings, or mechanical lock couplings, to accommodate different machinery designs and operational needs. Customizing the coupling mechanism ensures ease of use, secure attachment, and quick disengagement when necessary.

6. Protective Features: PTO shafts can be customized with additional protective features to enhance safety and durability. These features may include guard shields, safety covers, or slip clutches. Guard shields and safety covers provide physical protection by enclosing the rotating shaft and preventing accidental contact, reducing the risk of injuries. Slip clutches offer overload protection by allowing the PTO shaft to slip or disengage when excessive torque or resistance is encountered, preventing damage to the shaft and associated equipment. Customizing the protective features ensures compliance with safety regulations and addresses specific safety requirements of the machinery or application.

7. Material Selection: PTO shafts can be customized with different materials based on the application’s demands. Manufacturers can offer a range of material options, such as steel, aluminum, or composite materials, with varying strength, weight, and corrosion resistance properties. Customizing the material selection allows for optimizing the PTO shaft’s performance, considering factors like operating conditions, environmental exposure, and weight restrictions.

By providing customization options such as shaft length, spline sizes, yoke designs, torque ratings, coupling mechanisms, protective features, and material selection, manufacturers can ensure that PTO shafts are specifically tailored to meet the machinery and power requirements of different applications. Customized PTO shafts facilitate seamless integration, efficient power transfer, and reliable operation, enhancing the overall performance and productivity of the equipment.

pto shaft

How do PTO shafts contribute to transferring power from tractors to implements?

PTO shafts (Power Take-Off shafts) play a critical role in transferring power from tractors to implements in agricultural and industrial settings. They provide a reliable and efficient means of power transmission, enabling tractors to drive various implements and perform a wide range of tasks. Here’s a detailed explanation of how PTO shafts contribute to transferring power from tractors to implements:

Power Source: Tractors are equipped with powerful engines designed to generate substantial amounts of mechanical power. This power is harnessed to drive the tractor’s wheels and operate hydraulic systems, as well as to provide power for the attachment of implements through the PTO shaft. The PTO shaft typically connects to the rear or side of the tractor, where the power take-off mechanism is located. The power take-off derives power directly from the tractor’s engine or transmission, allowing for efficient power transfer to the PTO shaft.

PTO Shaft Design: PTO shafts are designed as driveline components that transmit rotational power and torque from the tractor’s power take-off to the implement. They consist of a hollow metal tube with universal joints at each end. The universal joints accommodate angular misalignments and allow the PTO shaft to transmit power even when the tractor and implement are not perfectly aligned. The PTO shaft is also equipped with a safety shield or guard to prevent accidental contact with the rotating shaft, ensuring operator safety during operation.

PTO Engagement: To transfer power from the tractor to the implement, the PTO shaft needs to be engaged. Tractors are equipped with a PTO clutch mechanism that allows operators to engage or disengage the PTO shaft as needed. When the PTO clutch is engaged, power flows from the tractor’s engine through the power take-off mechanism and into the PTO shaft. This rotational power is then transmitted through the PTO shaft to the implement, driving its working components.

Rotational Power Transmission: The rotational power generated by the tractor’s engine is transferred to the PTO shaft through the power take-off mechanism. The PTO shaft, being directly connected to the power take-off, rotates at the same speed as the engine. This rotational power is then transmitted from the PTO shaft to the implement’s driveline or gearbox. The implement’s driveline, in turn, distributes the power to the implement’s working components, such as blades, augers, or pumps, enabling them to carry out their respective functions.

Matching Speed and Power: PTO shafts are designed to match the rotational speed and power requirements of various implements. Tractors often feature multiple speed settings for the PTO, allowing operators to select the appropriate speed for the specific implement being used. Different implements may require different rotational speeds to operate optimally, and the PTO shaft allows for easy adjustment to match those requirements. Additionally, the power generated by the tractor’s engine is transmitted through the PTO shaft, providing the necessary torque to drive the implement’s working components effectively.

Versatility and Efficiency: PTO shafts offer significant versatility and efficiency in agricultural and industrial operations. They allow tractors to power a wide range of implements, including mowers, balers, tillers, sprayers, and grain augers, among others. By connecting implements directly to the tractor’s power source, operators can quickly switch between tasks without the need for separate power generators or engines. This versatility and efficiency streamline workflow, reduce costs, and increase overall productivity in agricultural and industrial settings.

Safety Considerations: While PTO shafts are essential for power transmission, they can pose safety risks if mishandled. The rotating shaft and universal joints can cause severe injuries if operators come into contact with them while in operation. That’s why PTO shafts are equipped with safety shields or guards to prevent accidental contact. Operators should always ensure that the safety shields are in place and secure before engaging the PTO shaft. Proper training, adherence to safety guidelines, and regular maintenance of PTO shafts and associated safety features are crucial to ensuring safe operation.

In summary, PTO shafts are vital components that enable the transfer of power from tractors to implements in agricultural and industrial applications. They provide a reliable and efficient means of power transmission, allowing tractors to drive various implements and perform a wide range of tasks. By engaging the PTO clutch and transmitting rotational power through the PTO shaft, tractors power the working components of implements, providing versatility, efficiency, and productivity in agricultural and industrial operations.

China Professional Pto Shaft Fit for Bush Hog Ath 600 and Ath 720, Ath 900, Fth 480, Fth 600, Fth 720, Mth 600, Mth 720 Series Mowers  China Professional Pto Shaft Fit for Bush Hog Ath 600 and Ath 720, Ath 900, Fth 480, Fth 600, Fth 720, Mth 600, Mth 720 Series Mowers
editor by CX 2024-02-06

China Professional CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts

Product Description

 

CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts

Product Description

PTO drive shaft

Brand New Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and many more applications.

PTO is a series 4, rated for 40HP it has 1-3/8″ 6 spline push pin on both ends for easy installment. Complete with safety shield, The PTO measures 43″ from end to end and has an 58″ maximum extended length.

 

These PTO shafts fit the following Finish Mowers:

Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Series Mowers;

Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Series Mowers;

Kubota: BL348A, B342A; Caroni TC480, TC590, TC710, TC910 with spline Input Shaft;

Ever-power most late models with splined input shafts, early models had some with smooth input shaft;

1. PTO Drive Shafts

PTO SHAFT WITH QUICK RELEASE YOKES AND OVER-RUNNING CLUTCH(RA), YOU CAN CHOOSE THE LENGTH
Chinabase is a professional manufacturer of PTO SHAFTS for farm machines and agricultural tractors from China. We provide more than 8 sizes of PTO shafts. There is also a full range of safety devices for agricultural applications. Our products are sold to America, Europe and all over the world. We will supply best quality products in most reasonable price.
Following are the tips how to order your PTO shafts:

2. Closed overall length (or cross to cross) of a PTO shaft.

3. Tubes or Pipes
We’ve already got Triangular profile tube and Lemon profile tube for all the series we provide.
And we have some star tube, splined tube and other profile tubes but only for a certain sizes.

4. End yokes
We’ve got 13 types of splined yokes and 8 types of plain bore yokes. I will suggest the usual type for your reference.
You can also send drawings or pictures to us if you cannot find your item in our catalog.

5. Safety devices or clutches
I will attach the details of safety devices for your reference. We’ve already have Free wheel (RA), Ratchet torque limiter(SA),
Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).

6. For any other more special requirements with plastic guard, connection method, color of painting, package, etc., please feel free to let me know.

Tube types
 

Spline tube Lemon tube
Star tube Trigonal tube

 

Function of PTO Shaft

Drive Shaft Parts & Power Transmission

Usage of PTO Shaft

Kinds of Tractors & Farm Implements

Yoke Types for PTO Shaft

Double push pin, Bolt pins, Split pins, Pushpin, Quick release, Ball attachment, Collar…..

Processing Of Yoke

Forging

PTO Shaft Plastic Cover

YW; BW; YS; BS; Etc

Colors of PTO Shaft

Green; Orange; Yellow; Black Ect.

PTO Shaft Series

T1-T10; L1-L6;S6-S10;10HP-150HP with SA,RA,SB,SFF,WA,CV Etc

Tube Types for PTO Shaft

Lemon, Triangular, Star, Square, Hexangular, Spline, Special Ect

Processing Of Tube

Cold drawn

Spline Types for PTO Shaft

1 1/8″ Z6;1 3/8″ Z6; 1 3/8″ Z21 ;1 3/4″ Z20; 1 3/4″ Z6; 8-38*32*6 8-42*36*7; 8-48*42*8;

 

Application

 

 

Company Profile

Our factory is a leading manufacturer of PTO shaft yoke and universal joint.

 

We manufacture high quality PTO yokes for various vehicles, construction machinery and equipment. All products are constructed with rotating lighter.

 

We are currently exporting our products throughout the world, especially to North America, South America, Europe, and Russia. If you are interested in any item, please do not hesitate to contact us. We are looking CHINAMFG to becoming your suppliers in the near future.

Packaging & Shipping

 

Certifications

 

Related products

You can click the picture to learn about relevant products

Installation Instructions

 

PTO SHAFT INSTALLATION INSTRUCTION

Install assembly

1 press-fit plastic pipe and plastic cap,
2 fill the groove on the CHINAMFG with oil

3. Slide the nylon bearing into the groove 4. Align nylon bearing and plastic protective cover

Disassembly

1. remove the nylon bearing clamp (three places) with a screwdriver, and then separate the steel pipe and plastic protective cover.
2. Take off the nylon bearing from the groove of the yokes.
3. repeat the above-mentioned steps for the other side.

 

SHORTENING THE PTO DRIVESHAFT

1. Remove the safety shield.
2. Shorten the inner and outer tubes according to the required length, and the inner and outer tubes shall be shortened by the same length at 1 time
3. Deburr edges of the drive tubes with a file and remove all filings from the tubes.
4. Shorten the inner and outer plastic pipes according to the required length, and the inner and outer plastic pipes shall be
shortened by the same length at 1 time.
5. Grease the internal drive tubes and reassemble them with a safety shield.
Check the minimum and maximum length of the driveshaft installed on the machine. In working condition, the drive tubes should overlap 2/3 length and the plastic tube should never be separated

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

pto shaft

What maintenance practices are essential for prolonging the lifespan of PTO shafts?

Maintaining proper care and performing regular maintenance on Power Take-Off (PTO) shafts is crucial for prolonging their lifespan and ensuring optimal performance. By following essential maintenance practices, you can prevent premature wear, identify potential issues early on, and maximize the longevity of your PTO shafts. Here are some key maintenance practices to consider:

1. Regular Inspection: Perform routine visual inspections of the PTO shaft to check for any signs of damage, wear, or misalignment. Look for cracks, dents, bent sections, or loose components. Inspect the universal joints, coupling mechanisms, protective guards, and other associated parts. Pay attention to any unusual noises, vibrations, or changes in performance, as these can indicate underlying issues that require attention.

2. Lubrication: Proper lubrication is essential for the smooth operation and longevity of PTO shafts. Follow the manufacturer’s recommendations regarding lubrication intervals and use the recommended lubricant type. Apply lubrication to the universal joints, CV joints (if applicable), and other moving parts as specified. Regularly check for adequate lubricant levels and replenish if necessary. Ensure that the lubricant used is compatible with the shaft material and does not attract dirt or debris that could cause abrasion or damage.

3. Cleaning: Keep the PTO shaft clean and free from dirt, debris, and other contaminants. Regularly remove any accumulated dirt, grease, or residue using a brush or compressed air. Be particularly diligent in cleaning the universal joints and areas where the shaft connects to other components. Cleaning prevents the buildup of abrasive particles that can accelerate wear and compromise the shaft’s performance.

4. Guard Inspection and Maintenance: Check the protective guards and shields regularly to ensure they are securely in place and free from damage. Guards play a critical role in preventing accidental contact with the rotating shaft and minimizing the risk of injury. Repair or replace any damaged or missing guards promptly. Ensure that the guards are correctly aligned and provide sufficient coverage for all moving parts of the PTO shaft.

5. Torque and Fastener Checks: Periodically inspect and check the torque of fasteners, such as bolts and nuts, that secure the PTO shaft and associated components. Over time, vibration and normal operation can loosen these fasteners, compromising the integrity of the shaft. Use the appropriate torque specifications provided by the manufacturer to ensure proper tightening. Regularly verify the tightness of fasteners and retighten as necessary.

6. Shear Bolt or Slip Clutch Maintenance: If your PTO shaft incorporates shear bolt or slip clutch mechanisms, ensure they are functioning correctly. Inspect the shear bolts for signs of wear or damage, and replace them when necessary. Check the slip clutch for proper adjustment and smooth operation. Follow the manufacturer’s recommendations regarding maintenance and adjustment of these safety mechanisms to ensure their effectiveness in protecting the driveline components.

7. Proper Storage: When the PTO shaft is not in use, store it in a clean and dry environment. Protect the shaft from exposure to moisture, extreme temperatures, and corrosive substances. If possible, store the shaft in a vertical position to prevent bending or distortion. Consider using protective covers or cases to shield the shaft from dust, dirt, and other potential sources of damage.

8. Operator Training: Provide proper training to operators on the correct operation, maintenance, and safety procedures related to the PTO shafts. Educate them about the importance of regular inspections, lubrication, and adherence to recommended maintenance practices. Encourage operators to report any abnormalities or concerns promptly to prevent further damage and ensure timely repairs or adjustments.

9. Manufacturer and Expert Guidance: Consult the manufacturer’s guidelines and recommendations regarding maintenance practices specific to your PTO shaft model. Additionally, seek advice from experts or authorized service technicians who are knowledgeable about PTO shaft maintenance. They can provide valuable insights and assistance in implementing the best maintenance practices for your specific PTO shafts.

By following these maintenance practices, you can extend the lifespan of your PTO shafts, optimize their performance, and reduce the likelihood of unexpected failures or costly repairs. Regular inspections, lubrication, cleaning, guard maintenance, torque checks, and proper storage are all essential in ensuring the longevity and reliability of your PTO shafts.

pto shaft

What safety precautions should be followed when working with PTO shafts?

Working with Power Take-Off (PTO) shafts requires strict adherence to safety precautions to prevent accidents and ensure the well-being of individuals operating or working in the vicinity of the equipment. PTO shafts involve rotating machinery and can pose significant hazards if not handled properly. Here are several important safety precautions that should be followed when working with PTO shafts:

1. Familiarize Yourself with the Equipment: Prior to operating or working near a PTO shaft, it is crucial to thoroughly understand the equipment’s operation, including the specific PTO shaft configuration, safety features, and any associated machinery. Read and follow the manufacturer’s instructions and safety guidelines pertaining to the PTO shaft and associated equipment. Training and familiarity with the equipment are essential to ensure safe practices.

2. Wear Appropriate Personal Protective Equipment (PPE): When working with PTO shafts, individuals should wear appropriate personal protective equipment to minimize the risk of injury. This may include safety glasses, hearing protection, gloves, and sturdy footwear. PPE protects against potential hazards such as flying debris, noise, and accidental contact with rotating components.

3. Guarding and Shielding: Ensure that the PTO shaft and associated machinery are equipped with appropriate guarding and shielding. Guarding helps prevent accidental contact with rotating parts, reducing the risk of entanglement or injury. PTO shafts should have guard shields covering the rotating shaft and any exposed universal joints. Machinery driven by the PTO shaft should also have adequate guarding in place to protect against contact with moving parts.

4. Securely Fasten and Align PTO Shaft Components: Before operating or connecting the PTO shaft, ensure that all components are securely fastened and aligned. Loose or misaligned components can lead to shaft dislodgement, imbalance, and potential failure. Follow the manufacturer’s guidelines for proper installation and tightening of couplings, yokes, and other connecting points. Proper alignment is crucial to prevent excessive stress, vibrations, and premature wear on the PTO shaft and associated equipment.

5. Avoid Loose Clothing and Jewelry: Loose clothing, jewelry, or other items that can become entangled in the PTO shaft or associated machinery should be avoided. Secure long hair, tuck in loose clothing, and remove or properly secure any dangling accessories. Loose items can get caught in rotating parts, leading to serious injury or entanglement hazards.

6. Do Not Modify or Remove Safety Features: PTO shafts are equipped with safety features such as guard shields, safety covers, and torque limiters for a reason. These features are designed to protect against potential hazards and should not be modified, bypassed, or removed. Altering or disabling safety features can significantly increase the risk of accidents and injury. If any safety features are damaged or not functioning correctly, they should be repaired or replaced promptly.

7. Shut Down Power Source Before Maintenance: Before performing any maintenance, repairs, or adjustments on the PTO shaft or associated machinery, ensure that the power source is completely shut down and disconnected. This includes turning off the engine, disconnecting power supply, and engaging any safety locks or mechanisms. Lockout/tagout procedures should be followed to prevent accidental energization or startup during maintenance activities.

8. Regular Maintenance and Inspection: Regular maintenance and inspection of the PTO shaft and associated equipment are vital for safe operation. Follow the manufacturer’s recommended maintenance schedule and perform routine inspections to identify any signs of wear, damage, or misalignment. Lubricate universal joints as per the manufacturer’s guidelines to ensure smooth operation. Promptly address any maintenance or repair needs to prevent potential hazards.

9. Training and Communication: Ensure that individuals operating or working near PTO shafts receive proper training on safe work practices, hazard identification, and emergency procedures. Promote clear communication regarding the presence and operation of PTO shafts to prevent accidental contact or interference. Establish effective communication methods, such as signals or radios, when working in teams or near noisy equipment.

10. Be Aware of Surroundings: Maintain situational awareness when working with PTO shafts. Be mindful of the location of bystanders, obstacles, and potential hazards. Ensure a clear and safe work area around the PTO shaft. Avoid distractions and focus on the task at hand to prevent accidents caused by inattention.

By following these safety precautions, individuals can minimize the risk of accidents and injuries when working with PTO shafts. Safety should always be the top priority to ensure a safe and productive work environment.

pto shaft

What benefits do PTO shafts offer for various types of machinery?

PTO shafts (Power Take-Off shafts) offer several benefits for various types of machinery in agricultural and industrial applications. They provide a flexible and efficient means of power transmission, enabling machinery to perform specific tasks and functions. Here’s a detailed explanation of the benefits that PTO shafts offer for different types of machinery:

Versatility: PTO shafts contribute to the versatility of machinery by allowing them to be powered by a common power source, such as a tractor or an engine. This means that a single power source can be used to drive multiple implements or machines by simply connecting and disconnecting the PTO shaft. For example, in agriculture, a tractor equipped with a PTO shaft can power various implements such as mowers, balers, tillers, sprayers, and grain augers. Similarly, in industrial applications, PTO shafts enable the use of a single engine or motor to power different machines or equipment, such as generators, pumps, compressors, and industrial mixers.

Efficiency: PTO shafts offer an efficient method of power transfer from the power source to the machinery. By directly connecting the power source to the driven machine, PTO shafts minimize energy losses that may occur with other power transmission methods. This direct power transfer results in improved overall efficiency and performance of the machinery. Additionally, PTO shafts allow for the adjustment of rotational speed and power output to match the requirements of the specific machinery, ensuring optimal operation and reducing unnecessary energy consumption.

Cost Savings: The use of PTO shafts can lead to cost savings in multiple ways. Firstly, by utilizing a single power source to drive multiple machines or implements, the need for separate engines or motors for each piece of equipment is eliminated, reducing capital costs. Secondly, PTO shafts eliminate the requirement for additional fuel or energy sources, as they tap into the existing power source, resulting in lower fuel or energy expenses. Additionally, the versatility offered by PTO shafts allows for improved equipment utilization, maximizing the return on investment.

Flexibility: PTO shafts provide flexibility in terms of equipment setup and configuration. They can be adjusted in length or equipped with telescopic sections, allowing for easy adaptation to different equipment arrangements and varying distances between the power source and the driven machinery. This flexibility enables operators to quickly connect and disconnect the PTO shafts as needed, facilitating efficient equipment changes and reducing downtime. Moreover, the ability to adjust the rotational speed and power output of the PTO shafts adds further flexibility, accommodating the specific requirements of different machinery and applications.

Ease of Use: PTO shafts are relatively easy to use, making them accessible to operators with minimal training. The process of connecting and disconnecting the PTO shafts is straightforward, often involving a simple coupling or locking mechanism. This ease of use enhances equipment operability, allowing operators to quickly switch between different implements or machines without significant effort or time-consuming procedures. Furthermore, the direct power transfer through PTO shafts simplifies equipment operation, as the machinery can be powered by the existing power source without the need for additional controls or power management systems.

Increased Productivity: PTO shafts contribute to increased productivity in agricultural and industrial operations. By enabling the use of versatile machinery configurations, operators can perform a wide range of tasks using a single power source. This eliminates the need for manual labor or the use of multiple machines, streamlining workflow and reducing the time required to complete various operations. The efficiency and reliability of power transfer through PTO shafts also contribute to improved productivity by ensuring consistent and effective operation of machinery, resulting in enhanced output and reduced downtime.

Safety: While not directly related to machinery performance, PTO shafts also offer safety benefits. The implementation of safety shields or guards on PTO shafts helps prevent accidental contact with the rotating shaft, reducing the risk of injuries to operators. These safety features are designed to cover the rotating shaft and universal joints, ensuring that operators cannot come into contact with them during operation. Proper training on PTO shaft operation and adherence to safety guidelines further enhance operator safety when working with PTO-driven machinery.

In summary, PTO shafts offer a range of benefits for various types of machinery. These benefits include increased versatility, improved efficiency, cost savings, flexibility in equipment configurations, ease of use, increased productivity, and enhanced operator safety. PTO shafts play a crucial role in agricultural and industrial applications by enabling the direct power transfer from a common power source to different machines or implements, resulting in optimized performance and operational effectiveness.

China Professional CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts  China Professional CE Certification Agricultural Wide Angle Tractor Factory Supply 6 Spline 540 Pto Drive Shaft for Bush Hog with Yoke Adapter Parts
editor by CX 2024-01-26

China GX240 GX270 1 To 2 Reduction Gearbox 22mm PTO Shaft For Go Kart Parts Go Kart Clutch pto shaft for bush hog

Applicable Industries: Machinery Fix Outlets, Construction operates
Showroom Spot: None
Video outgoing-inspection: Provided
Equipment Take a look at Report: Presented
Marketing and advertising Variety: New Solution 2571
Engine Kind: Gasoline, Gasoline Motor
Type: Reduction Gearbox
L&P Code: L01270RGB01M
Certification: CE
Horse Energy: 1HP-20HP
Products Name: GX240 GX270 Reduction Gearbox For Go Kart Parts L&P Parts
Right after Guarantee Services: No services, Spare elements
Regional Service Location: None
Packaging Details: Box/Plastic Bag/Bubble Bag
Port: ZheJiang /HangZhou Port

GX240 GX270 1 To 2 Reduction Gearbox 22mm PTO Shaft For Go Kart Components Go Kart Clutch L&P Components
Best Deals: In The united states/Europe Industry
Design Type: GX240 GX270
OEM Code:
L&P Code: L01270RGB01M
Model: L&P
Use For: Gasoline Engine
one to 2 Reduction Clutch
Go Kart
MOQ: 10 Pcs
Packing: Box/Plastic Bag/Bubble Bag
Payment Phrase: T/T,L/C,WESTERN UNION
Trade Expression: FOB,CIF,CFR,DDP,DDU,EXW,Express Delivery
Freight Phrase: By Sea,By Air,By Express(EMS FEDEX UPS DHL)
Sample Available: Yes (1-5 Times)
Supply Time: Within 15 times

1. Replacement parts for Honda engine: all GX120, GX160, GX200, GX240, GX270, GX340, GX390 and GX440 series, ZGY370 DC12V Reduction Motor Worm Turbo Geared Motor DC 12V 1RPM 2RPM-100RPM 200RPM Electric Gearbox Reducer and some of GX25, GX35, GX100, GX110, GXV135, GXV160, GCV160, GX620 and GX670.2. Substitution elements for Robin motor: all EY20 collection, and some of EY15, EY18, EY28, EH12, EX13, EX17 and EX21 sequence.3. Replacement components for CZPT motor: all components for 170F, 178F and 186F diesel engine4. Air Cleaner, Ignition Coil, Recoil Starter and some other quick-wear areas for KOHLER, BRIGGS&STRATTON, KAWASAKI, MITSUBISHI, WACKER and and so on.5. Substitution parts for CZPT generator: ET950, ET650, Agricultural Broad Angle Cardan CZPT Spline Cross Yoke Adapter Universal Joint Go over Rotavator Tractor Push bush hog PTO Shaft ET2600, ET2700, ET4600, ET6600 sequence.6. Substitution elements for Stihl chain noticed MS170, MS180, MS230, MS250, MS260, MS290, MS380 and MS381.7. Substitution elements for Husqvarna chain observed 137, 142, 340, 345, 350, 353, 365, 372, 8. Substitute elements for Zenoah-Komatsu chain noticed 4500, 5200.9. Following market areas for generator and water pump.ten. After market place components for Honda garden mowers.eleven. Other spare components, including blades, wheels and and many others

Packaging & Transport 1. Single Bundle: Bubble bag, plastic bag or carton box 2. Lable Sticker

drive shaft parts
China GX240 GX270 1 To 2 Reduction Gearbox 22mm PTO Shaft For Go Kart Parts Go Kart Clutch     pto shaft for bush hogChina GX240 GX270 1 To 2 Reduction Gearbox 22mm PTO Shaft For Go Kart Parts Go Kart Clutch     pto shaft for bush hog
editor by czh 2023-02-24

China Complete Set of Transmission Shaft New CV Joint Axle Assembly Front Drive Shaft pto shaft for bush hog

Item Description

Complete set of transmission shaft new CV joint axle assembly entrance drive shaft

OEM CODE: 

43420-20111, 43410-20583, 43420-332, JCV676N, TDL9870R, CO-3407A, HO-21A50, CO3407A, HO-21-A50, HN-36A50, T281A22, C99333, T281A21, PRJ720, 02-151-351, QF11C,JCV676N,TDL9870R,CO-3407A,HO-21A50,CO3407A,HO-21-A50,HN-36A50,T281A22,C99333,T281A21,PRJ720,02-151-351,QF11C00019,JC99330,CW1713,CW1712,CW1811,49-1013

Functions: 
1. We have been specialised in designing, producing generate shaft, steering coupler shaft, universal joints, which have exported to the United states, Europe, Australia and many others for years 
2. Software to all varieties of common mechanical situation 
three. Our merchandise are of higher intensity and rigidity. 
4. Warmth resistant & Acid resistant 
5. OEM orders are welcomed

Our factory is a leading manufacturer of drive shaft and common joint.

We manufacture large quality PTO yokes for a variety of autos, development machinery and tools. All merchandise are created with rotating lighter.

We are at the moment exporting our merchandise throughout the globe, especially to North The usa, South The united states, Europe, and Russia. If you are fascinated in any product, remember to do not be reluctant to get in touch with us. We are searching ahead to getting to be your suppliers in the around foreseeable future.
FAQ:
Q1: Are you trading firm or maker ?
A: We are manufacturing facility.

Q2: How lengthy is your supply time and cargo?
one.Sample Guide-occasions: usually 10 workdays.
2.Generation Direct-occasions: twenty-40 workdays right after getting your deposit.

Q3. What is your terms of payment?
A: T/T thirty% as deposit, and 70% just before delivery.

This autumn: What is your rewards?
one. Manufacturer,the most competitive value and excellent good quality.
two. Best technical engineers give you the ideal assist.
3. OEM is obtainable.
four. Rich inventory and swift shipping and delivery.

Q5. If you can not find the solution on our internet site,what do you subsequent?
Remember to send us inquiry with item photos and drawings by e mail or other approaches and we’ll verify.

 

US $20-150
/ Piece
|
100 Pieces

(Min. Order)

###

Type: Fork
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Carbon Steel
Power Source: CV Joint Axle Drive Shaft
Weight: 5lbs
Transport Package: Standard Sea Worthy Package

###

Customization:

###

43420-20111, 43410-20583, 43420-33200, 43430-60060, 43430-26012, 39100-2S660, 39101-ED505, 44010-S10-951, 44306-sna-n00, 44306-SNE-A11, GG06-25-50XD, GP34-25-60XC, FTB6-25-60X, 49500-1R610, 49501-2H112, 49500-0W610, 3M513B437DA, UC9T-25-50X,43410-20583,43420-33200,43430-60060,43430-26012,39100-2S660,39101-ED505,44010-S10-951,44306-sna-n00,44306-SNE-A11,GG06-25-50XD,GP34-25-60XC,FTB6-25-60X,49500-1R610,49501-2H112,49500-0W610,3M513B437DA,UC9T-25-50X G400406, 12-060134, JCV676N, TDL9870R, CO-3407A, HO-21A50, CO3407A, HO-21-A50, HN-36A50, T281A22, C99333, T281A21, PRJ720, 02-151-351, QF11C00019, JC99330, CW1713, CW1712, CW1811, 49-1013,12-060134,JCV676N,TDL9870R,CO-3407A,HO-21A50,CO3407A,HO-21-A50,HN-36A50,T281A22,C99333,T281A21,PRJ720,02-151-351,QF11C00019,JC99330,CW1713,CW1712,CW1811,49-1013
US $20-150
/ Piece
|
100 Pieces

(Min. Order)

###

Type: Fork
Usage: Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material: Carbon Steel
Power Source: CV Joint Axle Drive Shaft
Weight: 5lbs
Transport Package: Standard Sea Worthy Package

###

Customization:

###

43420-20111, 43410-20583, 43420-33200, 43430-60060, 43430-26012, 39100-2S660, 39101-ED505, 44010-S10-951, 44306-sna-n00, 44306-SNE-A11, GG06-25-50XD, GP34-25-60XC, FTB6-25-60X, 49500-1R610, 49501-2H112, 49500-0W610, 3M513B437DA, UC9T-25-50X,43410-20583,43420-33200,43430-60060,43430-26012,39100-2S660,39101-ED505,44010-S10-951,44306-sna-n00,44306-SNE-A11,GG06-25-50XD,GP34-25-60XC,FTB6-25-60X,49500-1R610,49501-2H112,49500-0W610,3M513B437DA,UC9T-25-50X G400406, 12-060134, JCV676N, TDL9870R, CO-3407A, HO-21A50, CO3407A, HO-21-A50, HN-36A50, T281A22, C99333, T281A21, PRJ720, 02-151-351, QF11C00019, JC99330, CW1713, CW1712, CW1811, 49-1013,12-060134,JCV676N,TDL9870R,CO-3407A,HO-21A50,CO3407A,HO-21-A50,HN-36A50,T281A22,C99333,T281A21,PRJ720,02-151-351,QF11C00019,JC99330,CW1713,CW1712,CW1811,49-1013

What Is a PTO Shaft?

A PTO shaft is a component that is important for a power take-off (PTO) tractor. There are many different kinds of PTOs, including Italian, German, and North American types. The types are categorized into different series, which will have different features such as bearing diameter, cap-to-cap length, and snap rings.
Shaft Collar

Power Take-Off (PTO) shaft

A PTO shaft is a high-speed working shaft that provides torque and lift. This is an advantage for machines that lift and lower loads and are often used on construction sites. Often, the operating elements are located outside of the operator’s cabin. A safety system is also present that allows the PTO shaft to automatically disengage if it is not turned on.
A safety retaining band 12 is used to secure the PTO shaft. The retaining band extends axially from the PTO shaft S and includes a hinge. The band may be adjustable in width to ensure a correct clearance from the PTO shaft. If necessary, it may also be secured with a conventional over-center clamp.
The power-take-off (PTO) shaft is a crucial part of a tractor. Understanding how power is transferred from the tractor’s engine to the implement requires a better understanding of how this shaft works. The torque and speed of the PTO shaft is essential to developing and utilizing the power of the tractor. There are many ways to measure torque and speed at the PTO shaft, including using a telemetry or encoder system.
A Power Take-Off (PTO) shaft safety retainer is an inexpensive, dependable, and fully effective device that protects the PTO shaft from entanglement. Its effectiveness will become clear after reading the specification. A power take-off shaft safety retainer is not difficult to install and is a good choice for many applications.
PTO shafts have a dangerous tendency to separate from the driven machinery. This poses a safety hazard because the PTO shaft can continue to whip around while the operator is driving the machine. Additionally, it can be very difficult for the operator to reach the power plant when operating PTO-driven equipment.

Safety chain

The safety chain on your PTO shaft is an important component of your tractor’s safety system. A properly guarded PTO can prevent entanglement with people, tools, and objects. Moreover, it reduces the risk of the PTO shaft becoming detached from the tractor. It also prevents people from stepping over the rotating shaft.
When not guarded, a PTO shaft is extremely dangerous. It can cause serious injuries and even death. Proper safety chains can prevent this from happening and protect livestock from damage to the PTO shaft. If you’re looking to purchase a safety chain for your PTO shaft, be sure to get one that fits tightly.
When properly attached, a safety chain can keep the shaft from swinging when the PTO is engaged. A 540-rpm PTO shaft will make more than two complete revolutions in less than five seconds. That means it can wrap someone in five tenths of a second. And if you try to pull away, you’ll get wrapped even tighter!
Another reason to use a safety chain is to prevent injury from clothing getting caught in the drive shaft. A jacket or a sweater can entangle itself around the PTO shaft and cause a serious injury. The clothing can also trap the injured limb against the shaft. Hence, the chain should be removed as soon as possible after the operation is completed.
A safety chain is an essential part of your tractor’s safety system. It prevents an accident from happening because of improper maintenance. A poorly maintained PTO shaft can result in severe injuries or even death. Properly installed and maintained safety chain can help you prevent any kind of PTO shaft accident.
Shaft Collar

Universal joint

A bad universal joint can cause a number of problems for your tractor or implement. These issues may include squeaking or clunking noises when you shift gears, or a shuddering sensation when you brake. If you notice any of these symptoms, it is best to take your vehicle to a mechanic right away for a thorough inspection. If not fixed properly, a bad universal joint can separate from the drive shaft and cause major damage to the tractor or implement.
In order to choose the proper universal joint, you must consider the size of your PTO shaft. Some implements have a diameter of 14 inches or more from the hitch point to the end of the input shaft. The longer distance helps prevent the PTO shaft from bottoming out when making sharp turns. It also prevents the two parts of the shaft from detaching during cornering.
Universal joints are used in agricultural and forestry equipment and other vehicles with large number of rotors. They can be made of different materials. The most common is steel or stainless steel. This material can last for many years. A universal joint is an excellent option for small tractors, lawn mowers, and other agricultural equipment.
The universal joint is also very useful when coupling or extending drive lines. It comes with 2 yokes and a cross kit. The yokes measure 6 x 13/8″ spline, while the cross kit measures 30,2 x 92 mm. The universal joint is made to withstand extreme temperatures. It can be easily disassembled and serviced if necessary.

Square rigid shaft

Torsion is a property of a mechanical system that is affected by changes in torsional rigidity. Torsional rigidity is measured as the torque needed to twist one unit of angular measurement over one unit of length. A shaft with high torsional rigidity will provide a stable mechanical interface.
Different shafts may have different types of collars. The most basic one is a sleeve, which is composed of a thick tube with the same diameter as the shaft. The sleeve is attached to each end of the shaft and has threaded inserts to prevent longitudinal movement.
The PTO shaft also has a safety shield on both ends. It helps to prevent accidents by securing equipment to the tractor. It can be found in domestic and metric shapes. The domestic versions are generally round and domestic shaped, while metric versions are available in a bell, football, star, and metric shape.
An CZPT coupling consists of three pieces: a center plastic disc, two encompassing discs, and a flange. These parts are joined together with a ring that is screwed to the shaft. Some couplings feature oil injection points on the coupling. These can supply oil under pressure to the coupling’s annular grooves. This helps it ‘float’ and aids in the removal.
Another type of flexible coupling is the universal joint. These couplings can be made from a variety of materials, such as rubber, braided metal wire, or woven wire. They can be fabricated to withstand various misalignments. But, unlike rigid couplings, flexible couplings are susceptible to shock and vibration.
Shaft Collar

Economy PTO

Economy PTO shafts are designed to reduce the overall torque and power consumption of a tractor. They can be manually adjusted to engage and disengage the PTO. The cab mounted control/monitoring unit 14 has a switch 19 that selects between the economy and normal driving modes of the PTO. Using the economy mode decreases the engine rpm while using a lower gear ratio to drive the PTO shaft.
Economy PTO shafts come in hydraulic and mechanical versions. Both types are suitable for agricultural tractors. They allow the tractor to operate at a lower rpm, which reduces noise and vibration. They can also be used in a wide range of equipment. The transmission PTO is the oldest type, and is directly connected to the transmission. When the clutch is engaged, it drives the transmission.
Standard PTO shafts are available in various diameters, splines, and speeds. Many implements are designed to be compatible with one or more of these types of PTO shafts. The domestic versions come with a splined front shaft and a square, rectangle, or round secondary shaft.
Another difference between the two types is the number of teeth on the toothed wheel. The economy PTO allows the tractor to run at a lower rpm than the standard PTO. The engine rpm can go as low as 1600 while using the economy PTO. It also helps to reduce noise and vibration in the cab.
The present invention solves these issues and provides an increased level of automation and operator awareness of the PTO function. It also includes a system for detecting the type of PTO shaft and automatically setting the parameters of the control routine.
China Complete Set of Transmission Shaft New CV Joint Axle Assembly Front Drive Shaft     pto shaft for bush hogChina Complete Set of Transmission Shaft New CV Joint Axle Assembly Front Drive Shaft     pto shaft for bush hog
editor by czh 2022-12-07

China High Quality Ball 6 20 Splined Metric Worm Wheel Axle Cutter Adapter Involute Gear Pto Hubs and Spline Shaft Stock Manufacturers pto shaft for bush hog

Merchandise Description

higher good quality ball 6 twenty splined metric worm wheel axle cutter adapter involute equipment pto hubs and  Spline shaft stock manufacturers 

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-999
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Stainless Steel

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

with high quality
China High Quality Ball 6 20 Splined Metric Worm Wheel Axle Cutter Adapter Involute Gear Pto Hubs and Spline Shaft Stock Manufacturers     pto shaft for bush hogChina High Quality Ball 6 20 Splined Metric Worm Wheel Axle Cutter Adapter Involute Gear Pto Hubs and Spline Shaft Stock Manufacturers     pto shaft for bush hog
editor by czh 2022-12-01

China PTO driven double twin disc towable fertilizer spreader Agriculture tractor trailed atv manure fertilizer spreader bush hog pto shaft

Relevant Industries: Producing Plant, Farms, Retail
Showroom Location: None
Movie outgoing-inspection: Presented
Machinery Examination Report: Presented
Advertising and marketing Sort: New Merchandise 2571
Guarantee of core components: 2 several years
Main Elements: Equipment
Condition: New
Application: Organic and natural Fertilizer Spreading
Electrical power: 20-one hundred KW
Dimension(L*W*H): 3.8*1.sixty five*1.7 meter
Excess weight: 900-1900 kg
Characteristics: High Performance
Guarantee: 1 Yr
Important Offering Points: Substantial Productivity
Product: agriculture equipment fertilizer machine
title: Fertilizer Spreader Pto Generate Fertilizer Spreader
Type: Tractor Fertilizing Machine
Colour: Crimson Colour
MOQ: 1 established
Use: to distribute natural fertilizer
Substance of Fertilizer Tank: Carbon Metal
employed for: natural fertilize
Match electrical power: twenty five to a hundred and twenty hp
Purpose: agriculture fertilizer spreader
Nearby Service Location: None
After-sales Support Provided: Free spare areas, Field set up, commissioning and training, Area servicing and mend provider, Video clip technological support, Online assist
Certification: CE
Packaging Particulars: The package deal of this machine will be with wooden case
Port: HangZhou port , ZheJiang port

Description of organic fertilizer

The device is really appropriate for the use of huge farms, grasslands and pastures, and can be utilized for natural and organic fertilizer, animal manure, soil fertilizer, and wine tanks.

Characteristic of fertilizer spreader
1: The measurement of the regulating valve of discharge port can be modified in accordance to various fertilizer output needs
2: The regulating valve controls the conveying speed of the chain. The larger the equipment, the more rapidly the conveying velocity of the chain, the greater the fertilizer stream fee, and vice versa.
three: The reducer offers a promise for the more secure procedure of the equipment. On the basis of the slowing down of the fertilizer supply speed, it can be multi-functionally sprayed powder fertilizer, granular fertilizer, and so on

Photos of fertilizer spreader

Specification of fertilizer spreader

Model Volume (m³) Fat(kg) Matched tractor electricity reducer Spreading width(meter
)
Tyre model Dimension(meter)
VLGB-1.8Y one.8 960 twenty five-50 optional six-fifteen 10-15 3.8*1.65*1.seventy five
VLGB-2.5Y 2.five 1350 30-sixty optional six-15 eleven.2-28 4.2*1.8*1.98
VLGB-3.8Y 3.eight 1610 fifty-eighty Provided six-fifteen thirteen.6-28 four.8*2.2*2.05
VLGB-7.6Y 7.six 1910 eighty-120 Provided 6-fifteen 10-20 five.5*2.2*2.25

Relevant machines
Granular fertilizer spreader

Company profile

Make contact with us For much more specifics of the fertilizer spreader , pls make contact with with us freely !

with high quality
China PTO driven double twin disc towable fertilizer spreader Agriculture tractor trailed atv manure fertilizer spreader     bush hog pto shaftChina PTO driven double twin disc towable fertilizer spreader Agriculture tractor trailed atv manure fertilizer spreader     bush hog pto shaft
editor by czh

China Double auger, chopper blade, loading bucket, hydraulically controlled, guaranteed Feed Mixer Working with Tractor Shaft PTO pto shaft bush hog

Max. Capability: 5 ton/h
Relevant Industries: Manufacturing Plant, Farms, House Use, Food Shop, Other
Showroom Place: Turkey
Issue: New
Sort: Mixer
Voltage: 380V 50Hz
Dimension(L*W*H): 4900x1900x2450
Fat: 2700 kg
Guarantee: 1 Yr
Crucial Offering Factors: High Productiveness
Advertising Variety: Common Product
Machinery Check Report: Provided
Video clip outgoing-inspection: Provided
Guarantee of main factors: 1 Yr
Main Parts: PLC, Equipment, Gearbox, Motor, Bearing, Engine, Strain vessel, Pump
Software: CZPT Farm
Product title: Animal Feed Mixing Equipment
Utilization: Animal Feedstuff Creating
Coloration: Clients’ Prerequisite
Operate: Automated
Energy: 55hp
Uncooked materials: Metal
Capacity: 3-6T/H
Merchandise: Feed Mill Tools
Certification: ISO9001
Port: Mersin Istanbul Iskenderun

Agrotiger Feed Mixing and Spreading Device offers its motion with the tractor PTO. Our feed mixing and distribution equipment, which are linked to the tractor with the draw ring, perform all their features by indicates of hydraulic factors. The device transmits the PTO motion from the tractor to the planetary reducer and from there to the gearbox. The lubrication reducer on the machine operates the oil pump with the tractor PTO motion. There are oil tank, oil pump, solenoid valves and hydraulic fittings necessary for all hydraulic elements on the device.Agrotiger Feed Mixing and Spreading Equipment It is a mixed device designed to keep the meat and milk quality at the optimum level in dairy cattle breeding, fattening and sheep breeding. With this device, problems-free feed mixing and distribution processes can be attained. Our machines create the sought after ration homogeneity and granule measurement in feed mixing and distribution procedures at the optimum amount. The goal in animal breeding is to make high quality breeding with least losses and damages. Our equipment, which are created entirely for this purpose, constitute an indispensable worth for you, valuable producers. You want to use as bait straw, hay, clover, silage, pulp, concentrated fodder, and so on. You can bring the items to a homogeneous framework in the feed mixer.

itemvalue
Applicable IndustriesManufacturing Plant, Farms, House Use, Meals Shop, Other
Showroom LocationTurkey
ConditionNew
Place of OriginTurkey
Konya
Brand NameAgro Tiger & Elibol
TypeMixer
Voltage380V 50Hz
Dimension(L*W*H)4900x1900x2450
Weight2700kg
Warranty1 Calendar year
Key Promoting FactorsHigh Productivity
Marketing VarietyOrdinary Item
Machinery Test ReportProvided
Video outgoing-inspectionProvided
Warranty of main elements1 Year
Core ComponentsPLC, Equipment, Gearbox, Motor, Bearing, Engine, Stress vessel, Pump
Max. Ability5 ton/h
ApplicationLivestock Farm
Product identifyAnimal Feed Mixing Equipment
UsageAnimal Feedstuff Producing
ColorClients’ Need
FunctionAutomatic
Power55hp
Raw materialsSteel
Capacity3-6T/H
ItemFeed Mill Tools
CertificationISO9001
Relevant Products Packing & Shipping
Delivery Time3-4 Weeks
Minimum Get Amount1 Piece
Packaging and Shipping and deliveryAs Per Global Standard
Customer Provider Organization Profile Agro Tiger Agriculture MachinesAbout UsOur company has been founded in Konya. the funds of agricultural routines and grow to be a foremost organization in countrywide and worldwide area of agricultural machinery producing sector with its wide merchandise range. The subsequent devices and equipments are provided inside of the product variety of our agency which has won a seat in all phases of agricultural creation by growing its solution variety in the fields. this sort of as harvest. livestock. yard equipments. soil cultivation and ete Sq. Balers, Straw Accumulating and Haymaking Devices, Roll Balers, Corn Harvesting Headers Sunflower Harvesting Headers, Feed Mixing and Distribution Devices, Solid and liquid Fertilizer Spreaders, Yard Fertilization and Fruit gathering Trailers, CZPT Crushers and CZPT Collectors.in get to have this range far delivering you high-good quality merchandise. we create our technological infrastructure. Analysis and Advancement and advertising and marketing community. The investigation and building actions are varied directly in accordance with the requirements of our farmers and detected mechanization deficiencies and higher-engineering products are offered to users. The large-high quality presented as a consequence of the analysis and growth routines always gives assurance to our farmers. Do not forget. trust begins with good quality. FAQ 1. who are we?We are dependent in KONYA, Turkey, start off from 2019,offer to . There are overall about 51-one hundred individuals in our office.2. how can we promise good quality?Constantly a pre-production sample prior to mass productionAlways ultimate Inspection just before shipment3.what can you acquire from us?Sunflower Harvesting,Corn Harvesting Header,Row Impartial Sunflower Header,3-String Twine Baler,Stone Crusher4. why need to you purchase from us not from other suppliers?Our organization has been started in Konya. the cash of agricultural routines and turn out to be a leading business in nationwide and international subject of agricultural equipment producing sector with its wide item selection.5. what providers can we give?Acknowledged Supply Conditions: null;Accepted Payment Forex:nullAccepted Payment Type: nullLanguage Spoken:null

custom drive shaft
China Double auger, chopper blade, loading bucket, hydraulically controlled, guaranteed Feed Mixer Working with Tractor Shaft PTO     pto shaft bush hogChina Double auger, chopper blade, loading bucket, hydraulically controlled, guaranteed Feed Mixer Working with Tractor Shaft PTO     pto shaft bush hog
editor by czh

Best price made in China – replacement parts – PTO shaft manufacturer & factory Approved pto shaft for howse bush hog 200HP 220HP Agricultural Transportion Wheel Tractor with Cab with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto manufacturing facility in China with 5 distinct branches. For a lot more particulars: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  price  made in China - replacement parts - PTO shaft manufacturer & factory Approved   pto shaft for howse bush hog 200HP 220HP Agricultural Transportion Wheel Tractor with Cab with ce certificate top quality low price

toyota yaris drive shaft Adhering dry shaft auto to universal driveshaft solutions “Survival weasler pto shaft catalog by pto push shaft clutch Quality, change a pto shaft tractor Advancement personalized driveshaft near me by pto travel shaft with slip clutch Technologies twisted push shaft & renault grasp travel shaft Credit history”, The business will constantly enhance solution performance to meet the increasing consumer requirements in the demanding design of operate. Principal goods include: manure spreading truck, potato planting/harvesting machine, disc plough, disc harrow, grass Mower/slasher, corn and wheat thershers, seeder, mouldboard plow, deep subsoiler equipment, rotary tiller, rear blade, fertilizer spreader, combine rice harvester, corn thresher, farm trailer, ridger, trencher, stubble cleaner, earth auger, cultivator and its equipment: Plow disc blades, harrowing movie, plough tip and share, cultivator tine, casting elements and so forth.

Most current enhance chassis
200 or 220hp, 4 wheel drive
Motor: SDEC 6 cylinder, in-line, water cooled, 4 stroke motor (State III),
Transmission box: 16F+16R transmission box
Total synchronizer shifted gears
Genuine Carraro entrance axle
Large good quality hydraulic components
Genuine LUK clutch
Steering wheel adjustable
Most recent cabin with A/C
Outer substantial pressure hydraulic technique
PTO shaft: Rear-position, double-velocity PTO (760/850r/min), Six-enamel spline
Front tread amount adjustable
Rear tread step less adju EPT
Multi-way valve (3 in & 3 out)
Class III suspension
Entrance ball EPT (seven layer) & Rear ball EPT (two layer)
Authentic Trelleborg Radial Tire: Entrance 18.4-26/Rear 20.8-38,
AUMAHR streamline motor protect. 

one.Are you a manufacture or buying and selling organization? 
We are a specialist maker and we can give tractors from 25Hp-220Hp and implements. .
2.what is actually your MOQ?
one device. three.How about the spare areas?
We can offer cost-free toolbox and effortless broken components.
four.Exactly where is the loading port?
HangZhou port, or to fulfill client’s need.
five.How prolonged is the lead time?
Generally 15-twenty five times. Depands on the quantity of your order.
6.How prolonged is the guarantee time?
eighteen months soon after the items supply to location port.
7.what’s your payment terms?
Normally we use T/T We also acknowledge other payment phrases, such as Western Union, PayPal and L/C.
eight.what is the tractor optional elements?
Can be equipped with ROPS, Canopy, Admirer cabin, Heater cabin, AC cabin, Air Brakes, Hydraulic valve out, Paddy tire, Turf tire or as per your specifications.
9.Can we use our own emblem or layout?
Of course.OEM is welcome any time. We can also provide complete tractor model layout.
10. Can be used for which implements?
Loader, Backhoe, Harrow, Mower, Plough, Planter, Trailer, Slasher, Snow blower or as for every your needs.

 

Best  price  made in China - replacement parts - PTO shaft manufacturer & factory Approved   pto shaft for howse bush hog 200HP 220HP Agricultural Transportion Wheel Tractor with Cab with ce certificate top quality low price

Best supplier made in China – replacement parts – PTO shaft manufacturer & factory Kubota rdth72 bush hog finish mower and Iseki Tractors Parts Pto Cardan Shaft with ce certificate top quality low price

We – EPG Group the biggest agricultural gearbox and pto manufacturing unit in China with 5 distinct branches. For far more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Best  supplier  made in China - replacement parts - PTO shaft manufacturer & factory Kubota   rdth72 bush hog finish mower and Iseki Tractors Parts Pto Cardan Shaft with ce certificate top quality low price

double knuckle pto shaft Below rebuilt generate shafts the allison pto bolts direction p52123551aa of infiniti g35 generate shaft managerial series 6 pto shaft with slip clutch feeling adam driveshaft of 700r4 driveshaft “Serving ag pto generate shaft agriculture, 2014 jeep cherokee drive shaft scoring a achievement via quality of merchandise and honesty in organization”, our products have been trusted by clientele and have obtained a bigger share of industry. The firm masking 88,000 square meters, has advanced tools and robust specialized toughness, such as the numerical management equipment equipment and machining facilities, CAD/CAM technique, industrial robotic and so on. Agriculture Cardan plastic guard tractor PTO shaft

1&rparMaterial&colon Spring steel&comma 65Mn&comma 60Si2Mn &lparSup6&rpar&comma 28SiMnB
2&rparProcess&colon Solid
three&rparHeat remedy&colon Normalized-hardened and tempered
four&rparHardness&colon forty – 50HRC
five&rparWorking several hours&colon two hundred-250 hrs&period of time

EPT has designed several spare components for Japanese employed tractors in the p EPT 11 several years&interval We produced the elements according to samples offered by consumers&interval

EPT Tractor Elements advantages&colon

one&period Most parts we have drawings&interval We can provide assemble drawing for your checking&interval

two&period Most components are in inventory&interval You can examine the inventory with us if you need to have&period of time

three&time period Sample buy also satisfactory ahead of bulk purchase&time period

four&time period Located in HangZhou&comma only 1 hour distance to ZheJiang &period

5&period Europe market place&colon We have Europe branch in France&interval We maintain some stock in France&interval

FAQ&colon
Q1&colon Can I purchase modest amount of your areas for Sample&quest

A&colon Of course&comma we can supply you sample if we have stock&comma and will ship you by DHL&comma FEDEX

In accordance to your specifications&comma or locate the cheapest Forwards for you&period of time

Q2&semi How could I know if the solution ideal for my tractor or not&quest
A&colon Remember to explain to us which solution you are fascinated in&period We will provide you the principal measurements&comma or you can supply your drawings or samples&comma we will make in accordance to your ask for&period

Q3&colon I w EPT to discover a supplier for my new products&time period Can you assist me&quest

A&colon Sure&time period You should kindly supply me your drawings or samples&time period Our engineer will make the drawing and create for you&period We will quotation you the expense&interval

Q4&colon How lengthy for you to make a new item&quest

A&colon Generally 20-35days for the drawing kinds and 35-forty times for the sampled ones&time period

Other tractor components&colon

Japanese tractor spare components in Stock 
tractor rim   gears 
 kit coupling   bearing 
 steering wheel  tractor hyperlink hitch 
 PTO shaft  tractor sealing KB-TX 
tractor blades   lamps 
tractor hitch YM F14&solF15   link hitch 
 tyre   sealing 
 gasket   light
 air filter  tractor hub 
 filter element   brake shoes 
 air strainer element   calande 
air filter cartridge   hitch 
 cardan  tractor ignition key 
 tractor drinking water pipe   klaxon 
 disc clutch KB-TX  mass tractor 
 counter   battery cap 
 clutch   ratchet wheel 
tractor bulb   oil pressor 
tractor light   radiator cap 
 exhaust collector  tractor regulator 
Tractor keys  stickers 
 gasket   light
tractor blades   lamps 

Best  supplier  made in China - replacement parts - PTO shaft manufacturer & factory Kubota   rdth72 bush hog finish mower and Iseki Tractors Parts Pto Cardan Shaft with ce certificate top quality low price