China Rhd HOWO 3m3 4m3 5m3 5 Cubic Meter Vacuum Sewage Truck for Gully Emptier Fuction comer pto shaft

Solution Description

I. Description of RHD CZPT 3m3 4m3 5m3 5 cubic meter vacuum sewage truck for gully emptier fuction

Purpose:

(1) Vacuum sewage suction truck (also known as truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum waste selection truck ,sewage suction truck,sewage vacuum truck ,squander vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and many others.) is employed to accumulate, transportation and discharge liquid these kinds of as soiled h2o,sludge,septic,crude oil and solid stuff these kinds of as little stones,bricks as nicely.It is ideal for cleansing the sewer,cesspit,gully ,and so forth. It is widely employed in environment and sanitation area.

(2)Accent of sewage suction purpose :Geared up with PTO, transmission shaft, vacuum suction sewage pump, high stress molding tank, dampness separator, gas-oil separation, multiple directional control valve, hanger rod, self-discharging valve, suck fecal gun and pipe community program.

(3) Vacuum tank ability ranges from 3,000 Liters to twenty,000 liters 

Features:

a.Cylinder vacuum tank can be lifted hydraulically to 40-forty five degree.Rear doorway can be opened and closed hydraulically.

 

b.Undertake EU vacuum pump (Italy brand) or equal China best model double vacuum pumps,super strong,hugely efficient.

 

c.Pump can be operated by a hydraulic motor or by an auxiliary engine.

 

d.Overfill technique with audio CZPT is outfitted ,protecting against the vacuum pump injury from sewage drinking water into vacuum pump when the tank is entire.

 

e.Great condition ,rational construction,durable and long provider lifestyle.

II. Technical of RHD CZPT 3m3 4m3 5m3 5 cubic meter vacuum sewage truck for gully emptier fuction

 

The Paremeters of Motor
Company/Model Yunnei
Rated Electricity 116hp
Gas Type Diesel oil
Displacement/Potential 3856ml
Emission Standard Euro3
Cylinder Straight/4/intercooling
Max. torque 560N.m
Velocity 3200rpm
The Parameters of Gear  
Tank Capacity three m3
Vacuum Pump Rotation Speed 800r/m-1400r/m
Max. Suction Lift >6m
Vacuum >500mmHg
Rotation Direction  Clockwise
Time for complete sucktion <5min
Widespread Equipment Vacuum pump, ball valve, oil cylinder for rear cap, oil cylinder for dumping, stress meter, window for showing liquid stage,lock method for rear cap, 4-way valve, moisture separator,sprinkler (optional), alarm for entire suction (optional),etc.

 

III. VACUUM SEAGE SUCTION TRUCK Details Photograph FOR REFERENCE 

 


V. VACUUM SEWAGE SUCTION TRUCK WORKMANSHOP

VI. Much more Option OF VACUUM SEWAGE SUCTION TRUCK FOR YOUR REFERENCE.

VII. Shipping and delivery:RORO/BULK VESSEL/CONTAINER 

  
RORO: The truck is pushed to the ship inside straight and fastened properly. It can protect the truck getting rusty and damaged for the duration of transport.

BULK:  The truck is lifted by crane then put on the vessel deck. This design is a lot more affordable.

CONTAINER: The truck is set into the container. This product is used for small product trucks

VIII. ABOUT US  

ZheJiang MANTEN Vehicle CO.,LTD  is an approved special truck manufacturer which has several many years in design ,product ,income and service in special vehicles like as boom truck , fire truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and and so on

(1) More than five hundred staff, massive and sophisticated production 
(2) twenty five professional engineers, can supply the ideal and least expensive layout
(3) Create stringent QC team to guarantee the good quality
(4) 1 calendar year or thirty,000km warranty which will come initial.
(5) A single established of spare components of chassis provided which will help you save cash on maintenance. 
(6) Offer specialized assistance and soon after serive for lifestyle.
(7) Expert revenue staff which will help you to decide on appropriate truck.

 

US $23,500-29,500
/ UNIT
|
1 UNIT

(Min. Order)

###

Certification: ISO9000, CCC
Emission Standard: Euro II/III/IV/V/VI
Payload: 3ton-5ton
Transmission Type: Manual
Fuel: Diesel
Tank Volume: 3, 000L-5, 000L

###

Customization:

###

The Paremeters of Engine
Manufacturer/Model Yunnei
Rated Power 116hp
Fuel Type Diesel oil
Displacement/Capacity 3856ml
Emission Standard Euro3
Cylinder Straight/4/intercooling
Max. torque 560N.m
Velocity 3200rpm
The Parameters of Equipment  
Tank Capacity 3 m3
Vacuum Pump Rotation Speed 800r/m-1400r/m
Max. Suction Lift >6m
Vacuum >500mmHg
Rotation Direction  Clockwise
Time for full sucktion <5min
Common Accessories Vacuum pump, ball valve, oil cylinder for rear cap, oil cylinder for dumping, pressure meter, window for showing liquid level,lock system for rear cap, four-way valve, moisture separator,sprinkler (optional), alarm for full suction (optional),etc.
US $23,500-29,500
/ UNIT
|
1 UNIT

(Min. Order)

###

Certification: ISO9000, CCC
Emission Standard: Euro II/III/IV/V/VI
Payload: 3ton-5ton
Transmission Type: Manual
Fuel: Diesel
Tank Volume: 3, 000L-5, 000L

###

Customization:

###

The Paremeters of Engine
Manufacturer/Model Yunnei
Rated Power 116hp
Fuel Type Diesel oil
Displacement/Capacity 3856ml
Emission Standard Euro3
Cylinder Straight/4/intercooling
Max. torque 560N.m
Velocity 3200rpm
The Parameters of Equipment  
Tank Capacity 3 m3
Vacuum Pump Rotation Speed 800r/m-1400r/m
Max. Suction Lift >6m
Vacuum >500mmHg
Rotation Direction  Clockwise
Time for full sucktion <5min
Common Accessories Vacuum pump, ball valve, oil cylinder for rear cap, oil cylinder for dumping, pressure meter, window for showing liquid level,lock system for rear cap, four-way valve, moisture separator,sprinkler (optional), alarm for full suction (optional),etc.

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

Shaft CollarThe Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China Rhd HOWO 3m3 4m3 5m3 5 Cubic Meter Vacuum Sewage Truck for Gully Emptier Fuction     comer pto shaftChina Rhd HOWO 3m3 4m3 5m3 5 Cubic Meter Vacuum Sewage Truck for Gully Emptier Fuction     comer pto shaft
editor by czh 2022-12-29